Search results

2003 dodge ram 2500 slt quad cab. Auto. 4x4. 136k miles. 2nd owner. A little history from where this started. I bought this in July 2010 with 100k miles completely stock. Since I have done a lot of work to this truck. I work at a diesel performance shop in the area, and have for the last 8...

Wondering if it is legal for a deck plated engine to be ran in the 2.6 class. PPL or NTPA. I don't really see anything in the rules stating this clearly. any help on this would be appreciated.

i have a steed speed manifold for a common rail with the external gate port. My question is what gate to run and how to control it? was looking at a precision 46mm gate, and? i see alot of different ways. was thinking about getting a manual boost controller, light spring in the gate, boost...

I am going to a different turbo setup and have some questions about turbine wheel size vs compressor size. I am going to be getting a Comp Turbo (might not know of them) and what they suggested was a 66mm compressor with a turbine of 79/71 with a .84 T4 housing. i will be running this with an...

I beleave i have found a glitch with the UDC software. for starters i have a 2003 truck with many things done to it. the problem/glitch i am experiancing is with rail pressure. i have a edge insight cs monitor that i watch load and rail pressure with. what i am seeing is after the truck has been...

was wondering what some of your guys egt's are with a given turbo, and of course what your fueling mods are. i have a 63/68/.83 on an 03 with 90hp injectors, smarty ssr, air dog and runs hotter than hell at WOT. crusing and towing is fine but when i lay into it 1600+ degrees. hoping for some...

on a 2010 6.7L that i put a smarty jr with ME file, exhaust, intake ect.. i pluged all the sensors for the exhaust back in but not in the exhaust, and im getting codes for the front temp sensor. i've tried a different sensor and still throughs the codes. i was wondering what could be wrong and...

i have a box stock s300, 63mm comp, 68mm turbine and was wondering what options smaller than the .88 a/r housing it came with still in a t4 flange?

I have a S300, 63mm compressor, 68mm turbine, with the open .88 a/r as it comes from borg warner. Wondering what housing options there is with a T4 flange? anything smaller or with a waste gate?

What is available for the front axle? want to do a e locker, but was told they dont make one for this axle? the truck is used for sled pulling so even a spool would work, but i cant find anything. Any help would be great. Thanks

Thoughts on running duals on a 800hp 2.6 common rail in 2.6 class? What to get to mount on a SRW axle? What tires to run? I am from Minnesota and some tracks the truck hooks good with singles and others not so much. The truck is an auto also. What do you think?

wondering what your thoughts are. duals or singles? and what whould be a cost effective way to put duals on a SRW axle? truck in question is a 800hp common rail that a freind of mine pulls with. has a hard time getting traction on some tracks and hooks fine on others.