Search results

Has anyone done a conversion useing a 05 isb and had ecm troubles like frying them, and how do you get ride of fault code for stuff you have deleted.

I have a 05 Cummins that the ecm keeps frying. Is there another ecm like a genuine Cummins ecm and harness I can put in it to get away from the dodge/Cummins ecm

Is there a bracket for the 5.9cr for the left hand side of the engine to mount the A/C??

Will a 46RE fit up behind a ISB 325?

My 05 has just started to idle at 992 rpm and about every 30 seconds has a miss there are no dtc's any help?????

I need to put a new transmission in my truck but I'm unsure as to what size stall in the convertor I should get?

Can you get a transfer case that the front drive shaft comes out on the right hand side of a dodge transmission??

I started to loose drive today and found not a lot of oil in the transmission and a lot in the radiator. Is it common for the heat exchanger to fail and is there a upgraded cooler?

Does anyone use a smarty on there cummins conversion?

Where is a good place to buy gear sets so I change my ratios?

Who in the states make a real off road caravan?

I'm running 4.10 diffs and 33inch tires and at 100kph or 62mph my engine is doing 1950 rpm and using heaps of fuel. I want to drop the revs down and don't know what diff to go to a 3.73 or a 3.54 and maybe 35's. If you can tell me what you are running may help me make up my mind thanks.

How can you tell if you have a faulty injector or two??

I'm in the process of pulling my engine apart, but when I put it back together I want to make it as reliable as I can... What are some mods I can do? I'm not chasing high horsepower but something that makes it better than stock if that makes sense. For eg. stay away from certain rebuild kits...

Are these engines prone to bearing failures?

Has any one had trouble with the Governor Pressure sensor? Mine will select first gear and then not anything else forward turn it off and try again it'll start in a higher gear I think maybe 3rd and go into O/D and works fine, drove it like that for 250km. Any thoughts on what's happening? I...

I've put a 05 CR and 48re into a 02 f250 . To get the auto to shift I had to get a speed signal, so I got that from the ABS controller {Gy/Bl wire} I firstly just tapped into it but it still didn't work so I then cut the wire to the speedo so now I have lost my speedo but now it shifts. My...

Looking for a 23 spine input shaft to suit a 273f transfer case and the transmission mounts for a 48re, thanks..

I'm trying to fit a cr into a 02 f250. Just wondering what people have done to fit a down pipe?

I've been doing some reading and found something about security key immobilizer module that has me worried when I go to start my 05 cr. What is it? And how do I get around it?