Search results

I have a gear driven pump that I am trying to find a pulley or adapter to make it a belt drive set up. I have searched with no luck. Anyone have any suggestions?

Let me know what you have.

It came on a Turbo my friend bought, looks like its never been run. 300.00 plus shipping. Possibly trade for wastegate and mandrel bends for building twin piping.

I currently run 33x15.50x16 mtz's. I carry 4200rpm's down the track in 4th gear. I have zero issues spinning out with mtz's. I came across a deal on a new set of 315 bfg at's. I know my track speed will benefit from a 35, but I am worried about spinning out. For those that run 35's how much...

Like the title says. for the 87/83 wheel. Thanks

Ran my buddies (02bigstrokin) 03 duramax on the rollers today after installing set of hamilton's new duramax valve springs. Did a before and after run and picked up 100hp with the springs installed. Guess the stock springs weren't closing all the way like they should have been. Thanks for the...

I stumbled across a billet wheel and would like to know some more about it. Who makes it? What's it off of? What can it be put on? What's it worth? These are some rough measurements. Inducer: 63.5 Exducer: 93 Shaft: 8 I believe its out of cat charger. Also has extended exducer tips. I will...

I have a 1.00 T4 housing for the 87mm turbine wheel. Has a machined DP flange to fit HX-40 DP. 100.00 bucks plus shipping or will trade for 1.10 or bigger T4 for the 87 wheel with the standard marmon flange.

I was looking around at super stock tractors and was curious what turbo this was.

I found this compressor cover in the dumpster at work. Im guessing it came off a 3500 series genset but really dont know. Inducer is 4.6" and the cover is about 17" tall. Just curious what it was and what it came off of. Shouldn't be too hard to figure out since there aren't alot of big reverse...

Anyone ever run one as a single? What about a PT8847?

I am moving up to the 3.0 class and I am wanting to redo my hitch to meet the open hitch rules. I would like to see some pics of a good draw bar setup and eveyones ideas on the best way to set them up. My truck is a ccsb.

Buddy has a GT45 over a S366 and the wastegate cover keeps blowing the gasket. Have tried silicone several times and even tried to making a gasket for it out of header gasket material and i keeps blowing through it. I have checked for flatness but it keeps blowing through it. What gives?

Where is a good place to find a 5" velocity stack?

I just got a s400 charger and I need a to find a new exhaust housing for it. Taking measurements with my caliper I am getting 87.40mm inducer and 80.30 exducer. I have a housing for a 88mm inducer but the exducer is to small for this charger. Anyone know what wheel I have and is it a stock S400...

I need a piece of 6" or 7" straight cut chrome. I hate to buy a brand new stack just to cut if down. Anyone got anything laying around? Thanks Travis

Like the title says Thanks Travis

I am looking for a t4 .90 housing Thanks Travis

I have my first hook of the season this weekend. I ran BFG at's last season with good success. I recently swapped to 305/70/16 MTZ's for a little more bite on our tracks. I have never run mud tires and I am curious as to what pressure I should start at? Track is clay.

I need some 2nd gen Power Tow Mirrors What vender has them, I hate buying things from Ebay Thanks Travis