02 230hp p pumped 24v

2

2002P-PUMP24V

New member
Joined
Dec 19, 2012
Messages
21
Hi guys new here.... So be gentle...

I have been working on p pumping my 24v for a little while.. I have a 230hp p pump, my .093 mild steel lines are on their way. Advanced timing 20deg. I also have a high tech 66/71/16 turbo on the way. Was wondering what you guys would recomend for dvs and injectors. Thanks in advance...
 
DV's in it should run fine with a decent set of injectors. 6x12 or something along those lines would be a decent clean setup with a 66, or 6x16 if you want to over fuel it like everyone in the world does.
 
just talk your injector builder about pop offs

whats your hp goal and what do use the truck for

stock dv can work just fine if want drive ability
 
i am wanting like 600 to 700 hp daily driver. very little towing, i was thinking 150 hp injectors, 093 connector tubes, 66/16 high tech turbo, i have fass fuel 60 hp tork tek ofv, afe intake, afe cold air, timing is advanced 20 deg. is this going to be close to reaching my goal?
 
I would run 7x12 with 024dv with the 66 should right in your hp range.
 
You must log in or register to reply here.
Back
Top