03-07 Pusher Cross Air intake (a.k.a. spool aid)

joelc79

New member
Joined
Oct 28, 2008
Messages
3,075
I have a practically brand new Pusher Cross Air intake piping kit.
It has been powder coated silver vein, comes with all silicone hose couplers and t-bolt clamps.
It is an actual kit, fits perfect. It fits with any standard style intake horn and comes with an apps bracket if you have an early 3rd gen.

$300 shipped
PUSHER Mobile
pe2eqepa.jpg

Only mine is silver vein





Sent from my fphone
 
There are two soft plugs in the head that pop out. You then take two supplied pieces of pipe and tap them in the same hole. This all done under the hood.


Sent from my fphone
 
Last edited:
Any detailed pictures on how it attaches ?

The pipes that fit in the plug holes are very snug and are tapped in with a hammer and if I recall correctly they have a sealant as well. After that everything is put together with boots and clamps.
 
^ what he said.
Thanks
My head is off, i'll take some pics this eve.


Sent from my fphone
 
Last edited:
3"
The intercooler outlet is 3" and the air horns are all 3" so i cant see a 3.5" doing anything but gaining attention.

On edit:
The mega comes with a intake horn that has a 3.5" inlet, thats a $750 kit.
This is as the picture shows above in post #1, it will however fit any aftermarket intake horn that is in the stock configuration, ie; i had it mounted to a AFE bladrunner intake horn.

For those of you wondering what difference it made for me i cant really tell ya. I had a p.o.s. set up before this that was home made and leaked. This kit fits like its suppose to be there but i am replacing my head now and will no longer fit my application. I purchased this for the list price of $349 with no coating, added an apps bracket for an additional $20. Once i test fit it to make sure it was quality i had it powder coated silver vein for $85 locally.

So i have some money into it and would run it again if i went with a conventional head..


Sent from my fphone
 
Last edited:
Back
Top