03 CR parts - CP3, fuel rail, block, cam, pistons, turbo

GOT-Torque

GOT-Torque

is
Joined
Jul 2, 2007
Messages
5,284
Truck spun a rod bearing. Had a knock in it but still ran until it was taken apart. Was a stock truck, no power adders.

CP3 $300
fuel rail/lines $200
harmonic balancer w/ ring $50
fuel filter setup $50
stock lift pump $100
idler pulley $50
head with stock springs $400
camshaft $100
block $350
exhaust manifold $100
stock turbo HE341 $300
pistons/pins (have yet to pull them)

If any prices are out of line, make an offer.
 
crankshaft also available $250.

Block will need cleaned up with a hone. One cylinder is questionable, may require a sleeve if the hone won't take care of it.
 
one piston needs replaced, the other 5 were fine. It turned out that the top rings were all cracked and the #5 piston was toasted (galled up). The others look ok. Make me an offer.
 
located in Nebraska, I know people that travel, so delivery to a truck stop near you is possible.

crank and block will be going to the machine shop to get checked out this week.
 
$150 for the pistons

$125 for the rods

$50 for bedplate

$100 for the oil pan

$75 for the rockers

Also have the injectors for sale (most likely one of them is bad). Make me an offer on one or all?
 
GOT-Torque said:
$150 for the pistons

$125 for the rods

$50 for bedplate

$100 for the oil pan

$75 for the rockers

Also have the injectors for sale (most likely one of them is bad). Make me an offer on one or all?
Click to expand...

I want the bed plate...you got a pm.
 
hey, any chance you can have the CP3 checked out to see if its up to snuff?? i know around 150k they start getting weak, i need a new one for my truck
 
bed plate is sold.

I heard back from the machine shop today:

Crank will polish std.

Block will require 0.020" over on #1, #5, & #6.

Head was hot tanked and magnefluxed, seats are good no cracks. Guides are good, no issues. Ready to go.
 
block is sold.

CP3 $275
fuel rail/lines $150
harmonic balancer w/ ring $50
fuel filter setup $50
stock lift pump $100
idler pulley $50
head with stock springs $400
camshaft $100
exhaust manifold $100
stock turbo HE341 $250
crankshaft $250
pistons $25 each
CR tappets $40
rods $20 each
oil pan $100
rockers $75
Injectors $75 each (no guarentee's)
 
You must log in or register to reply here.
Back
Top