05 and up dodge bolt on front drive shaft loops

toolmanoffroad

toolmanoffroad

Dont tread on me
Joined
Mar 8, 2007
Messages
917
I have 5 front drive shaft loops that were left over from the Steel AL race. Things havent been going so hot lately for me, and I havent been able to try to sell these. These fit 06 (I think 05 also but not sure maby you know) and up Dodges that havent been lifted (Triton :kick:) and are a true bolt on using your factory cross member bolts. These capture the shaft in two places not just one like others that I have seen, and those require you to drill into your frame :doh:. They have all been blasted and then powder coated for a tough finish. I have 2 in black, 2 in silver, and 1 in a candy apple red. I will tell you that the candy is a little more prone to chipping since it has a clear red laid over the silver base but it sure is pretty. I was selling them for $195, but how about $100 bucks to get them gone. There is only these 5 and no more... if these sell and things pick up then I will make more and become a vendor here on Comp D.
Amish Elegance, Triton, Poodot, Timbeaux, Billygoat, etc, etc all seen them at the Comp race, so if you have any questions on how the quality is just ask them.. Thanks guys....
 

Attachments

  • DSCF0096.jpg
    DSCF0096.jpg
    87 KB · Views: 78
  • DSCF0097.jpg
    DSCF0097.jpg
    88.7 KB · Views: 60
  • DSCF0099.jpg
    DSCF0099.jpg
    54.7 KB · Views: 92
pm me a price on one of the silver one's to 64804. where could a guy find a set of rear loops to match and/or u joint shields? thanks
 
THEDIESELMAN said:
Would like to know that also
Click to expand...

If these sell, then I will start selling as a vendor here on Comp D :rockwoot: I already have a jig for the rear loops and they are also a bolt on, and are 1.25 in (fronts are 1in) and also capture the shaft in two places not just one. I wanted something that was over kill and was a bolt on.... dont like the idea of shafts coming in the cab and doing as they please. I havent been able to get to the mega cabs yet, I cant seem to get one in the shop for long enough to make a jig...:bang Sorry Triton...you would be first on my list :poke: Thanks guys...:Cheer:

Oh, they also act as a tranfer case skid plate. I will post up pics tommorow of the rears....but im sorry, I cant sell any till I pay my Comp dues. :rules:
 
Interested in one in black for my 2nd gen duallie- front.

e-mail me pics on the particulars -addy- total cost with s/h and pics of rear setup. ( www.RacinDuallie2aol.com )

These pass NHRA tech correct?
 
lcaad1249 said:
Are the 2005's different than the 04.5's?
Click to expand...

At first I thought that they would fit all the third gens, but found out that the cross member is just a little deeper on an 03 than it is on my 06 that I mocked them up on. The next batch will be spaced a little more so that it will fit 03 and up. I will check today and see what the year split is again.

As far as NHRA spec, my book says 7/8 x .065 steel tubing, and these are
1 x .092 wall tubing, and the bends are smooth as a babies butt. Hope that helps....:Cheer:
 
Shipping quote on the front loops..

So far $34 bucks is the cheapest I have found going through UPS, and about fell over at the $49 one..:bang Any ideas on how to save money on shipping something like this? :Cheer:
 
Ur probaly not. Its such a big box and now they charge a fuel sur charge too. So that screws everyone!!
 
I have an 05 I need a front and a rear, preferably black, do you have the rears?
 
You must log in or register to reply here.
Back
Top