Thanks for the info. I love those headlights. I went full retard with the LED projectors and LED strips.
Sister from another mister truck.Now all you gotta do is remove your steps or paint them black, truck looks killer man.
Thanks! I have black ready to spray for the fender vents, but haven't found the time yet. The steps are too handy to lose when strapping in car seats.Now all you gotta do is remove your steps or paint them black, truck looks killer man.
Thank you!! Larson @ Firepunk was able to follow your directions and I have no check engine light. Just the alternator light to go now, but I have a few parts coming to get that addressed.With the TCM removed, the H&S Blackmaxx that was in the truck recognized it as a manual and let me flash in a manual file. I then read it out with HP tuners and went through all the codes relating to the missing powerstroke. Flashed in my updated tune and no check engine light!
Also attached some current pics of the truck. Latest mod was some paint matched headlights with a HID projector for Hi/Low.
Thank you!! Larson @ Firepunk was able to follow your directions and I have no check engine light. Just the alternator light to go now, but I have a few parts coming to get that addressed.
I have the wiring for the grid heater in my office, just not on the truck yet. Planning on using the PCM heater trigger since I have the Ford IAT hooked up and it is properly commanding the wait-to-start light. Larson tuned the ECM when it was -8F out so it starts every time without the grid heater.Awesome! Do you know if it's possible for the ford pcm to run a heater grid relay? That's one thing I'd like to add but have not had the time to research it.
I have the wiring for the grid heater in my office, just not on the truck yet. Planning on using the PCM heater trigger since I have the Ford IAT hooked up and it is properly commanding the wait-to-start light. Larson tuned the ECM when it was -8F out so it starts every time without the grid heater.
my wait to start light works as well on the dash, I just don't know which wire the pcm commands for the glow plugs. If you could share what info you have on the wiring I'd greatly appreciate it!
Awesome! Do you know if it's possible for the ford pcm to run a heater grid relay? That's one thing I'd like to add but have not had the time to research it.