builditloud
New member
- Joined
- Sep 4, 2008
- Messages
- 21
I really hate to sell off this project but so be it. All parts have 2 dyno runs and 5 street runs on them unless otherwise noted. Email, text or phone any questions or comments if I don’t answer them here. Be aware that at work I have no phone service, and I work a rotating work schedule so please leave a message. All of the parts are here in Wy, 82732.
BAE stainless steel tubular exhaust header with high temp coating, t-4 only has 2 hours of run time. 600+ the ride.
Kenny’s 3 disk street puller 4-1 disk bronze inley 3800 lbs clutch. 1200+ the ride.
Kenny’s 5/8 girdle, with 14mm extra-long studs. 600+ the ride.
Scheid injectors 5X25 pop is set at 4000psi, dual feed. 600.00+ plus the ride.
Scheid 13mm pump, quick cam, ddp, delivery valves, .120 billet holders, scheid adjustable fuel plate, auto governor set at 5500, 450cc to 900cc. I bought this pump and the injectors with 4 hooks on them. 2000+ the ride
SMT rocker arm assembly, the original design, it the first one that Dick built, rockers just came back from SMT. 1000+ the ride.
Lightened and balanced crankshaft, with welded gear. 400+ the ride
Hamilton 188/220 .310-.320 steel cam –new in tube. 500+ the ride
Hamilton 220-240 .360-.360 105.5 steel cam, with welded and cam retainer. 500+the ride
Hamilton Extreme duty pushrods. 200+the ride
Hamilton 1.5” tappets. 150+ the ride
Peterson large diameter remote oil filter mount, -12AN. 175+ the ride
Derale oil thermostat, ½ npt set at 180 degrees. 25+ the ride
Hamilton head, full port and polish by joker fab with Hamilton 1.850/1.750 valves, dual springs, retainers and locks, radius cut for 4.55 x 105 fire rings. 3500+ the ride
JGS external waste gate, 60mm. Has the Ed Roth rat fink engraved on the top. 400+ the ride
Turbonetics 45mm external waste gate, racegate 45. 300+ the ride
FASS diesel/gas pressure regulator with boost compensating port, never used FPR-1001. 125+ the ride
Crutchfield Machine roller rockers, with an extra set of roller tips, needle cages, and adjusters. 1000+ the ride
Hurst 316-2014 - Hurst Pistol Grip Quarter Stick Shifter, with button, black plastic cover and reverse pattern. 100+ the ride
Canton Racing oil cooler, 11X11X1.5, ½” npt. 75+ the ride
Peterson remote relief valve, -10AN inlet and outlet, never used. 100+ the ride
[ame]http://i1260.photobucket.com/albums/ii569/builditloud/IMG_20130909_193139_239_zpsd5e4733a.jpg[/ame]
[ame]http://i1260.photobucket.com/albums/ii569/builditloud/IMG_20130914_222639_764_zps60f402a5.jpg[/ame]
[ame]http://i1260.photobucket.com/albums/ii569/builditloud/IMG_20130828_154102_456_zps03509177.jpg[/ame]
[ame]http://i1260.photobucket.com/albums/ii569/builditloud/IMG_20130805_154520_869_zpsbb30f9dd.jpg[/ame]
[ame]http://i1260.photobucket.com/albums/ii569/builditloud/IMG_20130805_230016_744_zps966272fc.jpg[/ame]
[ame]http://i1260.photobucket.com/albums/ii569/builditloud/1359234263751_zps937e553a.jpg[/ame]
[ame]http://i1260.photobucket.com/albums/ii569/builditloud/IMG_20140110_113611_012_zps9414e183.jpg[/ame]
For the most part I am willing to negotiate on the prices.
Thanks JR
three 0 seven six seven 0 five 1 five 5
BAE stainless steel tubular exhaust header with high temp coating, t-4 only has 2 hours of run time. 600+ the ride.
Kenny’s 3 disk street puller 4-1 disk bronze inley 3800 lbs clutch. 1200+ the ride.
Kenny’s 5/8 girdle, with 14mm extra-long studs. 600+ the ride.
Scheid injectors 5X25 pop is set at 4000psi, dual feed. 600.00+ plus the ride.
Scheid 13mm pump, quick cam, ddp, delivery valves, .120 billet holders, scheid adjustable fuel plate, auto governor set at 5500, 450cc to 900cc. I bought this pump and the injectors with 4 hooks on them. 2000+ the ride
SMT rocker arm assembly, the original design, it the first one that Dick built, rockers just came back from SMT. 1000+ the ride.
Lightened and balanced crankshaft, with welded gear. 400+ the ride
Hamilton 188/220 .310-.320 steel cam –new in tube. 500+ the ride
Hamilton 220-240 .360-.360 105.5 steel cam, with welded and cam retainer. 500+the ride
Hamilton Extreme duty pushrods. 200+the ride
Hamilton 1.5” tappets. 150+ the ride
Peterson large diameter remote oil filter mount, -12AN. 175+ the ride
Derale oil thermostat, ½ npt set at 180 degrees. 25+ the ride
Hamilton head, full port and polish by joker fab with Hamilton 1.850/1.750 valves, dual springs, retainers and locks, radius cut for 4.55 x 105 fire rings. 3500+ the ride
JGS external waste gate, 60mm. Has the Ed Roth rat fink engraved on the top. 400+ the ride
Turbonetics 45mm external waste gate, racegate 45. 300+ the ride
FASS diesel/gas pressure regulator with boost compensating port, never used FPR-1001. 125+ the ride
Crutchfield Machine roller rockers, with an extra set of roller tips, needle cages, and adjusters. 1000+ the ride
Hurst 316-2014 - Hurst Pistol Grip Quarter Stick Shifter, with button, black plastic cover and reverse pattern. 100+ the ride
Canton Racing oil cooler, 11X11X1.5, ½” npt. 75+ the ride
Peterson remote relief valve, -10AN inlet and outlet, never used. 100+ the ride
[ame]http://i1260.photobucket.com/albums/ii569/builditloud/IMG_20130909_193139_239_zpsd5e4733a.jpg[/ame]
[ame]http://i1260.photobucket.com/albums/ii569/builditloud/IMG_20130914_222639_764_zps60f402a5.jpg[/ame]
[ame]http://i1260.photobucket.com/albums/ii569/builditloud/IMG_20130828_154102_456_zps03509177.jpg[/ame]
[ame]http://i1260.photobucket.com/albums/ii569/builditloud/IMG_20130805_154520_869_zpsbb30f9dd.jpg[/ame]
[ame]http://i1260.photobucket.com/albums/ii569/builditloud/IMG_20130805_230016_744_zps966272fc.jpg[/ame]
[ame]http://i1260.photobucket.com/albums/ii569/builditloud/1359234263751_zps937e553a.jpg[/ame]
[ame]http://i1260.photobucket.com/albums/ii569/builditloud/IMG_20140110_113611_012_zps9414e183.jpg[/ame]
For the most part I am willing to negotiate on the prices.
Thanks JR
three 0 seven six seven 0 five 1 five 5
