- Joined
- Sep 2, 2006
- Messages
- 362
.120 Oversize injection lines without clamps $325 Shipped
DPS Water Injection kit most of it is there has own controller but I used along with a Snow kit. So I didnt use the DPS controller but pump and nozzles work fine. $250 OBO
Max Spool billet pushrods, have only a few hooks on them $155 Shipped
NV4500 Bellhousing Blanket is 4-1 and is dated July 2004. Has small burn area where exhaust contacts blanket. $300 Shipped
Derale Cooling fans, only have about a hour run time if that, does not come with radiator!! $275 Shipped OBO
Schied 3.0 Lightning Turbo 1.10 housing T3 foot comes with 2.8 Bushing NO shaft play at all very good charger - Make offer.
EEP/CDS 12mm Pump Has Big Delivery Valves and holders, 5k gov, is a 911 pump I bought it used supposed to flow 550ish CC's very good running pump. Make offer, looking for a good street pump.
12V block has cam journals bored for billet cam and has orings in block surface. is at .020 now but will need to go .030 or .040 for new pistons other than that block is in good shape $950
Hogan 100psi Intercooler has 1 hook on it was just installed. Is a direct factory replacement you do not have to use a smaller radiator. Would like a good intercooler back but can do without. $1050
Any Questions Just ask or PM! Thanks, Randy
DPS Water Injection kit most of it is there has own controller but I used along with a Snow kit. So I didnt use the DPS controller but pump and nozzles work fine. $250 OBO
Max Spool billet pushrods, have only a few hooks on them $155 Shipped
NV4500 Bellhousing Blanket is 4-1 and is dated July 2004. Has small burn area where exhaust contacts blanket. $300 Shipped
Derale Cooling fans, only have about a hour run time if that, does not come with radiator!! $275 Shipped OBO
Schied 3.0 Lightning Turbo 1.10 housing T3 foot comes with 2.8 Bushing NO shaft play at all very good charger - Make offer.
EEP/CDS 12mm Pump Has Big Delivery Valves and holders, 5k gov, is a 911 pump I bought it used supposed to flow 550ish CC's very good running pump. Make offer, looking for a good street pump.
12V block has cam journals bored for billet cam and has orings in block surface. is at .020 now but will need to go .030 or .040 for new pistons other than that block is in good shape $950
Hogan 100psi Intercooler has 1 hook on it was just installed. Is a direct factory replacement you do not have to use a smaller radiator. Would like a good intercooler back but can do without. $1050
Any Questions Just ask or PM! Thanks, Randy
