12mm plungers and barrels

ahale2772

ahale2772

New member
Joined
Oct 27, 2011
Messages
2,442
I have a set of USED plungers and barrels out of a P7100, they do not show much of any wear, yet I am not an expert on what a worn set looks like.

one plunger was suspected of sticking, yet I cannot see any evidence of any scuffing on any of the plungers.

100$ shipped takes them, I can provide pictures of them to anyone interested
 
So if I were to put these in my 215 pump in place of the notched plungers would I see a performance increase?
 
Maybe a slight only big diff is it wouldn't pull 4deg out during rack travel
 
Last edited:
ahale2772 said:
I have a set of USED plungers and barrels out of a P7100, they do not show much of any wear, yet I am not an expert on what a worn set looks like.

one plunger was suspected of sticking, yet I cannot see any evidence of any scuffing on any of the plungers.

100$ shipped takes them, I can provide pictures of them to anyone interested
Click to expand...

i would say plungers are in good shape for anyone wanting to buy them. the sticking was likely the ball on the rack in the rack bore or control sleeve.
 
lenahan05 said:
i would say plungers are in good shape for anyone wanting to buy them. the sticking was likely the ball on the rack in the rack bore or control sleeve.
Click to expand...


thanks for chiming in, like I said they show no visible wear, if they did I would not be selling them.

price is best offer, for any 215 guys they would be a good upgrade (to ditch the timing notches at least) if you wanted to send your pump out, have it benched and done up with these.
 
You must log in or register to reply here.
Back
Top