I have a 180 p-pump that was benched and flowed with 3k springs, 21mm rack travel at 500 rpm pump speed. It put out 506cc
Since then
5k springs were installed
full cut delivery valves (J.R. Atkins)
0.093'' delivery valve holders (edm cut)
Mack truck fuel plug
bic pen modified overflow valve
some AFC mods
0 plate
Guessing 525+cc after mods
$1500
I also have front gear case, and cover, gear, pump brkts, return line, oil line, fuel selonide (needs a boot), pump linkages, cam sensor relocation brkt (01-02 trucks) and oil fitting for drivers side pump.
$2200, whole conversion, except .93 lines
$2500 with lines too
ppump .93 steel lines
$400
24v industrial injection 6x16 injectors, vp pressures
$600
24v .93 crossover tubes
$150
everything $3100
Since then
5k springs were installed
full cut delivery valves (J.R. Atkins)
0.093'' delivery valve holders (edm cut)
Mack truck fuel plug
bic pen modified overflow valve
some AFC mods
0 plate
Guessing 525+cc after mods
$1500
I also have front gear case, and cover, gear, pump brkts, return line, oil line, fuel selonide (needs a boot), pump linkages, cam sensor relocation brkt (01-02 trucks) and oil fitting for drivers side pump.
$2200, whole conversion, except .93 lines
$2500 with lines too
ppump .93 steel lines
$400
24v industrial injection 6x16 injectors, vp pressures
$600
24v .93 crossover tubes
$150
everything $3100
