12v and CR garage clean out!

03f3507.3

03f3507.3

New member
Joined
Aug 2, 2007
Messages
1,585
Will be slowly updating this thread as I uncover more things. Have lots of common rail and cummins misc about anything that bolts to block will update more on friday!

CR block stiffner machined for aftermarket main studs-$100
CR rail pressure plug-$40
12v oil pan-$50
CR oil pan-$50
CR cross over tubes-$50
CR front cover with tin cover-$150
CR oil cooler-$35
CR oil filter housing-$20
CR alternator-$50
CR ac compressor-$50
CR starter-$50
CR powersteering pump with bracket-$50
CR ecm mount plate-$10
CR motor mounts-$30
12v alternator-$50
12v starter-$50
CR manifold and turbo(turbo needs work)-$150
 
CR rods-$75
CR Core Colt Big Stik-$75
CR pushrods-$20
CR to 48re adapter-$50
 
Sorry to all i said id get pics to had some car trouble out of my TDI friday then was at a car show all weekend in louisville will have pics posted Friday when I get home.
 
Is the starter in good working order? shipping to 66021
Also, what needs fixed on the turbo
 
Drasko said:
Is the starter in good working order? shipping to 66021
Also, what needs fixed on the turbo
Click to expand...

Both starters worked when removed Have someone in line for the CR once i can get pics up Friday as for the turbo pics will explain themselves ha
 
Drasko said:
so i take it its trashed? lol im needing the 12v starter
Click to expand...

Long story short was off a donor truck i bought over 4 yrs ago owner spot welded the housings back together where the vband would be located between exhaust and intake. Spins very free cpuld possibly grind welds so u could use the clamp. $65 shipped on 12v starter
 
how good are the motor mounts??any cracks in the rubber?? mine are shot and engine is out, so im lookin....
 
pm your paypal and ill send the $65 over for the 12valve starter.

How much for the exh manifold minus turbo?
 
Last edited:
I'm game for the turbo, minus the manifold.
PM sent, of course.

Mark.
 
Updated list taken off whats sold and added some other things ive found.


CR block stiffner machined for aftermarket main studs-$100
CR rail pressure plug-$40
CR cross over tubes-$50
CR front cover with tin cover-$150
CR oil cooler-$35
CR oil filter housing-$20
CR alternator-$50
CR ac compressor-$50
CR starter-$50
CR powersteering pump with bracket-$50
CR ecm mount plate-$10
CR motor mounts-$30
12v alternator-$50
CR rods-$75
CR Core Colt Big Stik-$75
CR pushrods-$20
CR to 48re adapter-$50
12v push rods-$40
CR push rods-$40
12v Oil filter housing-$20
12v Oil cooler-$30
12v Oil pump-$40
12v to 47re adapter-$40
 
You must log in or register to reply here.
Back
Top