GOT-Torque
is
- Joined
- Jul 2, 2007
- Messages
- 5,284
Competition 12V cummins for sale. (setup for 2.6/3.0 class)
Hamilton 12V competition head (ported with larger valves) - Flows over 300 cfm
runners in head and combustion chamber have been coated
Aluminum runner intake with radius'd runner inlets and 4" vband inlet
block and head are filled with hardblock
block has cam bearings throughout
Hamilton billet steel cam
6.7 crank
hardened/shot-peened 12v rods
ARP hardware throughout (625 headstuds, mainstuds, rod bolts, etc)
Wiseco forged pistons (valve reliefs, flat bowl, coated) with toolsteel rings
block/head fireringed
Adjustable cam gear
Adjustable pump gear
Billet front cover
Billet tappet cover
Polished valve covers
Competition fluidampr
Engine is complete from valve cover to pan and just needs injection system and turbo.
Engine has 11 passes on it and is ready to hit the track. I have videos of all the passes on the truck and will be willing to share more details with a serious buyer. Getting out of pulling. Engine was removed after 2015 season and has been stored in my HVAC controlled shop since then.
$10,000 OBO
Water to air intercooler setup (big bell core) with 4" piping is also available (has 3 big bilge pumps and 1.5" lines) $2,000 OBO
2001 Dodge Pulling chassis ( ECLB ) PPL 2.6/3.0 legal. Ready for big rear to be welded in (ladder bar frame is complete), hitch is complete. Has aluminum midplate for SCS dropbox. Front D60 has grizzly locker, 35" spline axles, 300M u-joints, 4.56 gears, has a ring gear load bolt installed, hydraulic steering, wildwood brakes and light weight rotors. New 35" BFG A/T's mounted on 16x10 wheels. Weight box ~3,000 lbs and contains 4 truck batteries. Has both front and rear aluminum driveshaft shielding, alum dash, racing seat, hand throttle, air shutoff controls, pedals, wildwood master cylinder and haisley slave cylinder setup, hoodstack, also have hoodstack piping. Truck is currently vinyl wrapped (doors could be re-wrapped for cheap). Dark tint, bed cover, alum tailgate cover, new head lights/tail lights, solid engine mounts. Wiring is still in the truck for steering, starter, A/W pumps, etc. Has aluminum inner wheel wells. Front clip is removable with about 6 bolts, makes it really easy to work on anything. This truck just needs your engine, and drivetrain from the clutch back and it's ready to go. $8,000 OBO
Text or call 402-801-2319 for more pics or info. Thanks
Video of a couple runs from last year:
https://www.youtube.com/watch?v=DmLsdFtNKAM
https://www.youtube.com/watch?v=11meoNxCr8o
Hamilton 12V competition head (ported with larger valves) - Flows over 300 cfm
runners in head and combustion chamber have been coated
Aluminum runner intake with radius'd runner inlets and 4" vband inlet
block and head are filled with hardblock
block has cam bearings throughout
Hamilton billet steel cam
6.7 crank
hardened/shot-peened 12v rods
ARP hardware throughout (625 headstuds, mainstuds, rod bolts, etc)
Wiseco forged pistons (valve reliefs, flat bowl, coated) with toolsteel rings
block/head fireringed
Adjustable cam gear
Adjustable pump gear
Billet front cover
Billet tappet cover
Polished valve covers
Competition fluidampr
Engine is complete from valve cover to pan and just needs injection system and turbo.
Engine has 11 passes on it and is ready to hit the track. I have videos of all the passes on the truck and will be willing to share more details with a serious buyer. Getting out of pulling. Engine was removed after 2015 season and has been stored in my HVAC controlled shop since then.
$10,000 OBO
Water to air intercooler setup (big bell core) with 4" piping is also available (has 3 big bilge pumps and 1.5" lines) $2,000 OBO
2001 Dodge Pulling chassis ( ECLB ) PPL 2.6/3.0 legal. Ready for big rear to be welded in (ladder bar frame is complete), hitch is complete. Has aluminum midplate for SCS dropbox. Front D60 has grizzly locker, 35" spline axles, 300M u-joints, 4.56 gears, has a ring gear load bolt installed, hydraulic steering, wildwood brakes and light weight rotors. New 35" BFG A/T's mounted on 16x10 wheels. Weight box ~3,000 lbs and contains 4 truck batteries. Has both front and rear aluminum driveshaft shielding, alum dash, racing seat, hand throttle, air shutoff controls, pedals, wildwood master cylinder and haisley slave cylinder setup, hoodstack, also have hoodstack piping. Truck is currently vinyl wrapped (doors could be re-wrapped for cheap). Dark tint, bed cover, alum tailgate cover, new head lights/tail lights, solid engine mounts. Wiring is still in the truck for steering, starter, A/W pumps, etc. Has aluminum inner wheel wells. Front clip is removable with about 6 bolts, makes it really easy to work on anything. This truck just needs your engine, and drivetrain from the clutch back and it's ready to go. $8,000 OBO
Text or call 402-801-2319 for more pics or info. Thanks
Video of a couple runs from last year:
https://www.youtube.com/watch?v=DmLsdFtNKAM
https://www.youtube.com/watch?v=11meoNxCr8o