Figured id move everything to one thread,
S475/92/1.10 360 thurst maybe 2 hours of total run time. t4 turbo with 4" v band cover for compounds and stock cover comes with exhaust flange new $1000
Straight Steed t 4 ,12v with wastegate port $650
SFI billiet flex plate with ARP bolts $350
4 side billet frost plugs, 1 rear coolant bypass plate and one front billet frost plug used without a fan $150
Billet Tappet cover $175
ATI damper with no crank pick ups $400
Billet front timing cover and adjustable pump gear $650
12v p7100 injection lines $100
Darren Morrison 12mm p7100 pump 6000 auto gov 550+ cc's $1500
155 marine 5x.20 injectors with .010 lift $550
12v adaptor plates $125 each
1st gen motor mount barackets, and blocks $100
12v valve covers One has an oil fill welded to it. $100
Goerend 2800-3000 Stall Convertor maybe 20 miles on it. Perfect for a large single or Large compounds $900 Will come with paperwork verifying it is a goerend
12v head, dual valve springs with updated locks and retainers. All springs were pressure set. Extrensive porting to the exhaust and bowl work. Back cut valves. Porting was done by joker fab. Still retains the stock intake shelf but could work a deal out to drop it off up there for more work the buy would pay for or buy it as is. $1750
96 12 block bored .020 over
block was decked, all bearings were checked for cleanance over 2200 in machine work
Rotating assembly was balanced up to 6000 rpm
Mahle Marine pistions with .150 fly cuts and tops were coated.
total seal gapless second ring.
Billet Steel Camshaft 226-240 106.5 LSA .330/.340 Lift Nolimit mfg
comes with matching pushrods for the cam base circle.
New 24v tappets when installed, cam was broke in on start up
Shot peaned and polished rods with ARP rod bolts
Arp Main studs
Welded crank gear
8.3 HV oil pump
All cummins gaskets
$4500
Might have more laying around but ill add as i find stuff. Buyer pays for all shipping, Paypal as a gift or pay for the fees. Dont ask about something if you dont have the money, save me some time. Thanks
S475/92/1.10 360 thurst maybe 2 hours of total run time. t4 turbo with 4" v band cover for compounds and stock cover comes with exhaust flange new $1000
Straight Steed t 4 ,12v with wastegate port $650
SFI billiet flex plate with ARP bolts $350
4 side billet frost plugs, 1 rear coolant bypass plate and one front billet frost plug used without a fan $150
Billet Tappet cover $175
ATI damper with no crank pick ups $400
Billet front timing cover and adjustable pump gear $650
12v p7100 injection lines $100
Darren Morrison 12mm p7100 pump 6000 auto gov 550+ cc's $1500
155 marine 5x.20 injectors with .010 lift $550
12v adaptor plates $125 each
1st gen motor mount barackets, and blocks $100
12v valve covers One has an oil fill welded to it. $100
Goerend 2800-3000 Stall Convertor maybe 20 miles on it. Perfect for a large single or Large compounds $900 Will come with paperwork verifying it is a goerend
12v head, dual valve springs with updated locks and retainers. All springs were pressure set. Extrensive porting to the exhaust and bowl work. Back cut valves. Porting was done by joker fab. Still retains the stock intake shelf but could work a deal out to drop it off up there for more work the buy would pay for or buy it as is. $1750
96 12 block bored .020 over
block was decked, all bearings were checked for cleanance over 2200 in machine work
Rotating assembly was balanced up to 6000 rpm
Mahle Marine pistions with .150 fly cuts and tops were coated.
total seal gapless second ring.
Billet Steel Camshaft 226-240 106.5 LSA .330/.340 Lift Nolimit mfg
comes with matching pushrods for the cam base circle.
New 24v tappets when installed, cam was broke in on start up
Shot peaned and polished rods with ARP rod bolts
Arp Main studs
Welded crank gear
8.3 HV oil pump
All cummins gaskets
$4500
Might have more laying around but ill add as i find stuff. Buyer pays for all shipping, Paypal as a gift or pay for the fees. Dont ask about something if you dont have the money, save me some time. Thanks
