12v parts,pulling truck partout!

cumminsram

giddy
Joined
Jun 26, 2007
Messages
1,012
Injectors....600
Fire ringed head with 60lbers inc...800
standard 12mm a1s down 3 studs I believe not h11s 225.00
south bend 3850 dd only pulled the truck outside with it....1250.00
Injection pump.....1350.00
Shortblock or long block make an offer z stroken or anyone, has block girdle as well I believe I forgot to mention that above.

Would do trading on a precision rifle (GAP Crusador, 700 with a MCmillan or AICS in 308) or a fixer upper 4x4 5sp 1st gen reg cab)

Heres original truck add with details.
1995 Green Dodge Ram 2500 4x4 5sp

Green with newer bed and rusty cab and fenders, truck is not a looker.Has 31in baja claws on now with stock rims and no traction bars.

Motor, Started with a bare block at the end of last summer.
Has all new main and rod bearings and new cam bushing.

Hamilton diesel 3.0 cam with mahle style pistons cut to clear and decompressed. Stock head fire ringed with Haisley set and .20 over gasket.
Comes with titanium retainers and keepers and 60 lb velve springs.
Has 12mm h11 head studs with one torque on them.

Fuel: 12mm 180 pump benched and built at TDI. 550cc with 0 plate ff. balanced 5ks with full cut dvs.

Keating 5x.018s tightned pattern, opened up feed port

Hd intercooler boots

New South Bend 3850 dd with 1 3/8 imput shaft.

Needs a fuel system, only been test fired on 97 gph holley red. Im sure im missing a bunch here

http://s268.photobucket.com/albums/jj22/cummins-ram/

10,800 Iv got way to much in it. Motor has only been fired no hooks. Any questions just hit me up. With a body this would be a really cool truck.
 
How much for the engine without the pump.. Selling a turbo? if so what is it?
 
thats the only thing I didnt come up with a price for. shoot me a price the worst I can say is no.
 
at the moment boots are spoken for,

turbo and diesel injection built the pump using 180 cam profile and plungers, it was rebuilt and stand calibrated to 550cc. it has full cut dvs im not sure where rack travel is set Im pretty sure 18mm. pump timeing is pin timed so when both tieming pins are in place its 0 degrees on motor so your sarting with 12.5 and adding
 
Back
Top