12V PERFORMANCE PARTS chargers p pump injectors cam manifold

AllCrankedUp

AllCrankedUp

puller
Joined
Mar 9, 2010
Messages
351
have a used haisley large intermediate cam. It is a 234/254 with 300 lift. It requires fly cutting the pistons .120 for enough valve clearance. i am asking $550 obo

Brand new never run billet s467.7 "68" with race cover and .90ar housing T-4 foot $1300 obo

Billet s483 from E.D with polished race cover and 1.10 housing t-6 foot. It has about 6 hooks on it. $1600 obo

5x20 dual feed injectors from E.D. I bought them used and had them freshened up. Only 6 hooks on them also $800 obo

Jgs 60mm external wastegate with E.D t-4 plate and pipe $500 obo

atHot pipe for s300 to s400 compound setup $200 obo

Brand new mahle large bowl pistons
.020
Gold Coated on tops
Pc-9 on skirts
0.100 cut valve reliefs
Brand new rings in the boxes, new wrist pins and clips
compression should be right at 16.2:1 - 16.3:1 $1100 obo

used stainless diesel polished exhaust manifold t-4 foot $750 obo

12mm p7100 pump with the 911 quick delivery cam, Scheid laser cut delivery valves, .120 delivery valve holders, rack plug, 5500 gov springs, 0 fuel plate, and modified AFC.
pump was bought new right from bosch toward the end of this season and I had all the stuff put in at a local diesel injection service.
it has about 30 street miles on it and 2 hooks. $1850 obo

make offers the worst I can say is no
 
have a used haisley large intermediate cam. It is a 234/254 with 300 lift. It requires fly cutting the pistons .120 for enough valve clearance. i am asking $500 obo

Brand new never run billet s467.7 "68" with race cover and .90ar housing T-4 foot $1200 obo

Billet s483 from E.D with polished race cover and 1.10 housing t-6 foot. It has about 6 hooks on it. $1500 obo

5x20 dual feed injectors from E.D. I bought them used and had them freshened up. Only 6 hooks on them also $700 obo

Jgs 60mm external wastegate with E.D t-4 plate and pipe --SOLD

atHot pipe for s300 to s400 compound setup $200 obo

Brand new mahle large bowl pistons
.020
Gold Coated on tops
Pc-9 on skirts
0.100 cut valve reliefs
Brand new rings in the boxes, new wrist pins and clips
compression should be right at 16.2:1 - 16.3:1 $1100 obo

used stainless diesel polished exhaust manifold t-4 foot --SOLD

12mm p7100 pump with the 911 quick delivery cam, Scheid laser cut delivery valves, .120 delivery valve holders, rack plug, 5500 gov springs, 0 fuel plate, and modified AFC.
pump was bought new right from bosch toward the end of this season and I had all the stuff put in at a local diesel injection service.
it has about 30 street miles on it and 2 hooks. --SOLD

make offers the worst I can say is no
 
Is the can for drag racing or pulling? Does it require being degreed in?
 
Man would i love to have that 67, need a clutch though, wont hold what i have for power now. Ttt for ya
 
You must log in or register to reply here.
Back
Top