12V Question

Dreambreaker

Dreambreaker

Div. 3 Diesel Competitor
Joined
Dec 24, 2007
Messages
172
2008 2.5" Season:

Ok, so I am fixing to bolt on a Schwitzer Charger on a 12V. It is a 64/79 with a 18cm housing on the exhaust side. How good will this spool? I know I should just get a Ind. Injection 64mm but the money tree didnt bloom last year! The truck has 215 Pump, Laser Cut DV's, 4K Spring, and 370's and a SB DD Clutch. I am wanting to add some larger injectors, probably bigger than 435's but I dont know yet. Also I would like to know what yall suggest to run the timing on. I've heard 20 to 25 will be optimal. Any other suggestions, also h2o will be added very soon.
 
Before you bolt it on I would have it plugged to make sure it passes, most chargers with a 64mm wheel will have a compresor inducer larger than 2.5.
 
It passed, that is the first thing I checked! SmokingDodge12v, are you guys (W.F.O.) going to come to Bowling Green in April.
 
Only fear I would have is that you will fall off the charger too soon with the larger housing. If you could get a 14 cm wastegated housing I think what would be better.
 
You must log in or register to reply here.
Back
Top