12v short block part out, Fass 220, Ppump, Misc 12v

5.9smoker02

5.9smoker02

New member
Joined
Aug 25, 2011
Messages
62
I have a few parts laying around that were left over from when I parted out my 2.5 truck. All parts except for the injection pump have around 15 passes on them.

12v block and crank. It is bored .020 over and has cam bearings in all the journals. 14mm mains- ARP studs with two torques on them. Crank is turned .010 under on both the mains and rods, and is also drilled for dowels for the damper. $1200

Hamilton 207/220 cast cam. Comes with 24v tappets, bronze thrust plate, and has a gear on it with a bolt on retainer. $650

Maxxspool push rods. $150 shipped

Arp 12mm head studs. Two torques on them. $400 shipped

Fass 220. Comes with everything needed to install on a regular cab truck, except for the draw straw. Around 15 hooks and the associated run time, no street miles. Bought new last spring. $500

Mahle 286110 pistons and rods. Pistons are .020 over, have Polydyn coatings, and have .100 deep valve reliefs. Rods have arp rod bolts and were balanced. $1200

Columbus built 12mm pump. Auto governor with 5k spring. Puts out around 550cc without a plate. Will include the dual feed line. $750

All prices are obo. Looking to move the stuff because I don't need it sitting around anymore. I can send pictures via text. 937-564-5064
 
Good seller, bought some stuff off his 2.5 and arrived quick and just as described. Wish I could swing that pump. GLWS
 
Interested in push Rods if u still have them. And are they standard length or custom?
 
Does the pump come with paper work? what delivery valves does it have? are the holders for the factory size injection lines? Thank you for your time!
 
I have a few parts laying around that were left over from when I parted out my 2.5 truck. All parts except for the injection pump have around 15 passes on them.

12v block and crank. It is bored .020 over and has cam bearings in all the journals. 14mm mains- ARP studs with two torques on them. Crank is turned .010 under on both the mains and rods, and is also drilled for dowels for the damper. $1200

Hamilton 207/220 cast cam. Comes with 24v tappets, bronze thrust plate, and has a gear on it with a bolt on retainer. $650

Maxxspool push rods. SOLD

Arp 12mm head studs. Two torques on them. $375 shipped

Fass 220. Comes with everything needed to install on a regular cab truck, except for the draw straw. Around 15 hooks and the associated run time, no street miles. Bought new last spring. SOLD

Mahle 286110 pistons and rods. Pistons are .020 over, have Polydyn coatings, and have .100 deep valve reliefs. Rods have arp rod bolts and were balanced. $1200

Columbus built 12mm pump. Auto governor with 5k spring. Puts out around 550cc without a plate. Will include the dual feed line. SOLD

All prices are obo. Looking to move the stuff because I don't need it sitting around anymore. I can send pictures via text. 937-564-5064
 
12v block and crank. It is bored .020 over and has cam bearings in all the journals. 14mm mains- ARP studs with two torques on them. Crank is turned .010 under on both the mains and rods, and is also drilled for dowels for the damper. $1100

Hamilton 207/220 cast cam. Comes with 24v tappets, bronze thrust plate, and has a gear on it with a bolt on retainer. $500

Mahle 286110 pistons and rods. Pistons are .020 over, have Polydyn coatings, and have .100 deep valve reliefs. Rods have arp rod bolts and were balanced. $1100
 
You must log in or register to reply here.
Back
Top