1410 ujoint for 241DHD and seal

I just paid $15 each at advanced auto parts a few days ago. It was for a Neapco u-joint (stronger one without the grease fitting). I would have went with a true spicer u-joint, but I was in a pinch and needed the truck the next day...
 
Neapco is a USA company based in PA...good stuff from what I've seen!

1410 Spicer greasable part# is 5-160x
 
LOL, I dropped the ball, I meant the 1410 yoke for the front output of the 241DHD, and the matching seal.
 
the seal is a national # 3946 about 12 bucks the centering flange yoke is a precision # 628C im not sure on the price of that one though both of them should be pretty easy to get ahold of
 
Last edited:
redneckfarmer said:
the seal is a national # 3946 about 12 bucks the centering flange yoke is a precision # 628C im not sure on the price of that one though both of them should be pretty easy to get ahold of
Click to expand...

The one I am looking for isn't a flange. It is a 1410 yoke.
 
Google can verify this but I'm fairly sure the front output on the 241 is the same as a 205. 205 yokes are easy to find, not sure about the seal though.
 
LReiff said:
Google can verify this but I'm fairly sure the front output on the 241 is the same as a 205. 205 yokes are easy to find, not sure about the seal though.
Click to expand...


Well the seal is the show stopper. I got the seal number off of mine, I have a yoke, looking to build a spare Tcase up, and figured I would just get the yolk.
 
Rowe Truck Equip.
Lafayette, IN.

They're a big truck (semis) shop but have been building shafts and selling related parts for pullers and mud boggers and what-not for awhile now.

I talked with the guy for about a 1/2hr. the other day....knows his sh!t!!

Jim Long
Driveline Shop
765-447-3900 ext. 108
1-888-447-5566

See if he can give ya some help.
 
dieseltracks said:
Rowe Truck Equip.
Lafayette, IN.

They're a big truck (semis) shop but have been building shafts and selling related parts for pullers and mud boggers and what-not for awhile now.

I talked with the guy for about a 1/2hr. the other day....knows his sh!t!!

Jim Long
Driveline Shop
765-447-3900 ext. 108
1-888-447-5566

See if he can give ya some help.
Click to expand...

Thanks, I found the seals, I know rowe truck, and I know Jim. He built both of my driveshafts for my puller.
 
zstroken said:
I looked and didn't see them. I saw the 1480 for the 241DHD.

Thanks!
Click to expand...

Crud, my bad, I have the rear 1480 on my site. Call me tomorrow and I'll get you a price on the 1410 for the front of the tcase.
 
You must log in or register to reply here.
Back
Top