6.7STRAWSIE
BALLS DEEP
- Joined
- Jul 28, 2009
- Messages
- 83
1995 Dodge Cummins 4x4
12 valve, Truck has the following parts
ARP Headstuds
60lb. valve springs
O-Ringed head
Titanium retainers
billit keepers
DDP Stage 3 injectors
Raptor 100gph fuel pump, areomotive a1000 fuel pump
12mm p7100 done by columbus diesel pump flows 600cc and rpm is set at 5800
hasiley machine camshaft
s475 2.6 turbo
silcone intercooler boots
southbend dd4200 clutch
1 3/8 input shaft
dana rear end 3.54 gears
Brand new 35 inch nitto tires
The truck is set up for sled pulling, truck has ladder bars, bump stops, and a trick hitch and made 650 hp on the dyno. The truck has no transmission or transfercase. This would be a good truck for someone who wants to get into pulling but not have to spend a ton of money on it and have all the time in it. Truck also has new paint. Located in Columbus Ohio. Asking 12,000 obo. Possible trade for a 4x4 duramax
12 valve, Truck has the following parts
ARP Headstuds
60lb. valve springs
O-Ringed head
Titanium retainers
billit keepers
DDP Stage 3 injectors
Raptor 100gph fuel pump, areomotive a1000 fuel pump
12mm p7100 done by columbus diesel pump flows 600cc and rpm is set at 5800
hasiley machine camshaft
s475 2.6 turbo
silcone intercooler boots
southbend dd4200 clutch
1 3/8 input shaft
dana rear end 3.54 gears
Brand new 35 inch nitto tires
The truck is set up for sled pulling, truck has ladder bars, bump stops, and a trick hitch and made 650 hp on the dyno. The truck has no transmission or transfercase. This would be a good truck for someone who wants to get into pulling but not have to spend a ton of money on it and have all the time in it. Truck also has new paint. Located in Columbus Ohio. Asking 12,000 obo. Possible trade for a 4x4 duramax
