1996 dodge cummins puller

jobespullin

New member
Joined
Oct 19, 2010
Messages
26
--------------------------------------------------------------------------------

for sale i run in a 2.8 class because thats our local rules, would make a better 2.6 truck in most areas
engine: girdled block, hd rod bolts, scheid 234/254 cam, billet push rods, head is milled with intake header, 5x18 injectors, .093 lines, 14mm head studs, fire ringed, 120 ib valve springs, schwitzer 3.0 s4 sleeved to 2.8 110 exhaust housing, 3 piece manifold
pump: 12mm, half cut dv's, rack cap, timing is at 38 degrees, 5k governor springs
drivetrain:haisley dual disk weighted clutch, bigger rear drive shaft, front and rear is welded, i had a cable to move locking ring and a i fubared it at last pull needs new cable or if i keep it ill break down and put a locker in the front, bigger rear drive shaft, 1410 u joints, 5.38 gears, i pull in 2nd high or 4th low and it hogs em at the end, could prob use a little taller gears if guy wanted to, 33x12.5 trxus tires, scatter blanket

also have ice box intercooler on it

would also sell an 04 elite 25+5 gooseneck trailer tandem axle would like to get 12000 obo for truck or 16000 for both call or text 217 259 8450 i have a video on youtube or can text pics/ email BODY IS ROUGH
 
Top