Smoke Is HP
Rolling Coal is Stupid
- Joined
- Nov 17, 2011
- Messages
- 44
For sale 1996 Ford Cummins conversion. I have taken this one done to the frame and sand blasted and painted it. Has rebuild DANA 60 King Pin front Axle with a Spool. Truck body has 246K miles. Trans and axles have about 5K on them, the motor has about 150 miles on it. So motor will need to be worked to seat the rings. Truck needs paint has epoxy primer on it, needs a windshield. Truck will need a bracket fabricated for the A/C compressor. I have all the parts needed to make the A/C work.
Located in Beaumont Texas
Motor,
Arp main studs, head studs and rob bolts.
Hamilton Valve Springs, Extreme push rods
Colt Big Stick cam
150 Airdog, 7x12 DFI injectors, pump benched by Seth at 4KRPM and 500CC @ 25PSI .093 injection lines.
3rd gen intercooler, HE351, BD exhuast manifold.
Trans,
6 Steel Planets,PPE dual disk converter, internal shift kit and 6.0L oil cooler.
Asking 10k for the truck. Welling to trade for regular cab auto 2nd or 3rd Gen Dodge. Selling because I do not need two CCSB trucks. Looking to build a Shorty.
Located in Beaumont Texas
Motor,
Arp main studs, head studs and rob bolts.
Hamilton Valve Springs, Extreme push rods
Colt Big Stick cam
150 Airdog, 7x12 DFI injectors, pump benched by Seth at 4KRPM and 500CC @ 25PSI .093 injection lines.
3rd gen intercooler, HE351, BD exhuast manifold.
Trans,
6 Steel Planets,PPE dual disk converter, internal shift kit and 6.0L oil cooler.
Asking 10k for the truck. Welling to trade for regular cab auto 2nd or 3rd Gen Dodge. Selling because I do not need two CCSB trucks. Looking to build a Shorty.