1st time on the dyno and Im happy!

ME.

ME.

master bus boy
Joined
Feb 18, 2008
Messages
273
I hit the dyno in my 96 and am very pleased with the results. The truck has stock injectors, dv's, pump and turbo hx 35/12. Just basic knobs turned and buttons pushed on my 12v. It has a little head work done but nothing major. HP 405.9 TQ 932.1 :rockwoot:
IMG_0002.jpg

IMG_0001.jpg
 
those are some nice numbers, is the truck an auto or a manual, and whats your setup, im running:
18* timing
4gsk
stock 181 dvs
dragon flow injectors
0 plate afc setup for full rack travel
mack rack plug
but im still on a stock hx35/12 i have an 18.5 housing im gonna put in a few weeks and then hopefully dyno it.
 
auto
22* timing
cds 5k
stock 181's
stock injectors
no plate
mack plug
full travel afc
stock hx 35/12
0 rings, 20 over headgasket, arp's
My old head was cracked so I got mild porting on the new one

I would also use the 18.5 if I had one. They make more power and are not to laggy for me. Im going to use one with my twins when I finish my truck.
 
Last edited:
ME. said:
auto
22* timing
cds 5k
stock 181's
stock injectors
no plate
mack plug
full travel afc
stock hx 35/12
0 rings, 20 over headgasket, arp's
My old head was cracked so I got mild porting on the new one

I would also use the 18.5 if I had one. They make more power and are not to laggy for me. Im going to use one with my twins when I finish my truck.
Click to expand...

daaayum now you really got me wondering what i can crank out seeing as how i have 175hp over stock injectors and 4* less timing
 
Yea I was excited to see my numbers. I was hoping for 363 because my ford buddy was there and he makes 632 with injectors. So it was worth the money for me. I just bought a 98 12v so soon I will be swaping the 181's for 191's and my 12cm for a 18cm housing and see what happens.


9712valve
Are you going to use the 12cm housing or 18.5?
 
ME. said:
Yea I was excited to see my numbers. I was hoping for 363 because my ford buddy was there and he makes 632 with injectors. So it was worth the money for me. I just bought a 98 12v so soon I will be swaping the 181's for 191's and my 12cm for a 18cm housing and see what happens.


9712valve
Are you going to use the 12cm housing or 18.5?
Click to expand...

I think his Ford makes 362, not 632. It is a Ford after all :poke:
 
Forrest Nearing said:
I might have a 21cm laying around
Click to expand...


That’s what I need. Maybe we can work something out. I had one on my first gen and kinda liked it.


And yea his truck made 362 not 632. Man I suck at typing. :bang
 
ME. said:
Yea I was excited to see my numbers. I was hoping for 363 because my ford buddy was there and he makes 632 with injectors. So it was worth the money for me. I just bought a 98 12v so soon I will be swaping the 181's for 191's and my 12cm for a 18cm housing and see what happens.


9712valve
Are you going to use the 12cm housing or 18.5?
Click to expand...

the 18.5cm housing, but i have yet to install it.
 
yah i can't wait to see how much better it runs with that 18.5 housing you can feel the truck kinda hit a wall and see it in the egt's when i get to a certain rpm in 4th gear.. that the turbo is waaay off the map, and the engine isn't breathing good. but i've still pushed it up to 115 with 4.10's and only 33's
 
You must log in or register to reply here.
Top