2.5 12v Cummins $8500

RickFox

RickFox

Active member
Joined
Oct 28, 2006
Messages
1,233
12v cummins. $8500

5.9 12v block 40 over, balanced rods and pistons
ARP, 625 head and main studs, and rod bolts.
Hamilton Extreme duty push rods
Hamilton 200/220/109 cam
180 tho valve relief pistons with coated skirts. 15:1 compression
5x20 Weston nozzles on stock bodies, just rebuilt by Weston
Keating Machine billet front cover
Billet Tappet cover
ATI superdamper

180 pump, just back from Seth
-0402736885
-035 dv's
-stock dv holders
-no plate
-haisley 5k kit
-modified afc (25psi full fuel)
-pinned at 16* btdc
-max 450cc
-0psi boost 150cc
-Adjustable Timing gear

Head has been ported and polished with 185# dual springs, shelf has been removed as well with a stock appearing intake built and firerings
Bullseye Batmowheel s463/83/.9 on a Stainless t4 manifold
Stock water pump with fins shortend


Motor probably had 20-25 hooks, just redid all bottom end with all new crank and Cummins main and rod bearings from spun rod bearing. Motor has maybe 5 minutes of idle time on it. Decided to go CR

Rick
 
I bought it from Tarter6bt, and these are his videos from last year. This is before the pump work and I had Weston redo the injectors.

Marshfield: [ame="http://www.youtube.com/watch?v=Y_2NmgyzgPw"]http://www.youtube.com/watch?v=Y_2NmgyzgPw[/ame]

Buffalo: [ame="http://www.youtube.com/watch?v=1jbNq38qyWM"]http://www.youtube.com/watch?v=1jbNq38qyWM[/ame]
 
Some pictures I have off my phone

a4ununy6.jpg


yzujequr.jpg


ybe4uta3.jpg


2a5yzyzy.jpg
 
I'd be interested in parts if it comes to that... but this is a steal of a price! Glws
 
Macktruckdriver said:
Any better pics if the intake? Wondering how it looks if it will pass our rules.
Click to expand...
I don't have any one my phone but I can take some tonight when I get home. It is a bolt on style that looks identical to the stock shape and uses the stock grid heater plate and intake elbow.
 
Is it cast or fabricated from sheet steel? I think the second I put 20' on someone they will make that intake an issue.
 
Also would consider partial trade for a CR longblock, the more complete the better.

Rick
 
Bump for ya Rick. This motor is built right from day one. If anyone has questions on it contact rick or myself.

Whomever asked bout the intake its made of steel with 3/8 or 1/2 inch flange that bolts to the head. Rules stated down here stock appearing. Never once got questioned on it. Very strong and stout motor.
 
You must log in or register to reply here.
Back
Top