fullrut1514
New member
- Joined
- Mar 25, 2012
- Messages
- 475
Whew where do I start?
Engine:
Every single fitting is aero quip an fittings on engine. All hoses are stainless braided
Gorilla girdle.
14mm main studs
Carillo billet rods
Weisco forged coated pistons 1
14:1 compression
Colt stage 6 cam.
Cam bearings down the block.
Filled block
Fire ringed block only
Hamilton cast head
Hamilton big valves fully ported.
Joker fab intake and valve spring setup.
Haisley pushrods.
Harland Sharpe rockers.
One piece billet valve cover.
Wet head.
Steed speed t6 comp manifold.
14mm head studs
Fully balanced rotating assembly
Fuel system:
5x.025 duall feed International injectors
.120 fuel lines.
Schied ag gov pump self containing oil
Waterman fuel pump with 3 way dump valve and regulated by check valves.
Air:
Precision 2.6x4 turbo. 1.0 housing.
Water to air IC setup
Full tube chasis rear.
Draw bar style hitch
D&J machine hubs on rear.
35 spline spool in rear
35 spline scs axle shafts.
4.63 rear gears
4.56 front gears
1410 front one piece drive shaft
1480 rear drive shaft.
Front axle has 35 spline axle shafts and grizzly locker in front.
All new bearings and seals. New ball joints and bearing assemblies
Custom heim joint front control arms that are adjustable. Custom track bar also.
Real wheels at all four corners.
Brand new trxus sts 35x12.50x16 tires
Edge cts data logger system.
5 point harness and racing seat.
Hand throttle.
Everything on the truck has 15 hooks on it. Truck is brand new. Over 100k invested. Asking 65k. Or trade for something. Turn key operation ready to go. Only reason for selling is its not what I expected.
Call or text for info and questions 8133881126 Thanks.
Located in tampa fl 33525
Engine:
Every single fitting is aero quip an fittings on engine. All hoses are stainless braided
Gorilla girdle.
14mm main studs
Carillo billet rods
Weisco forged coated pistons 1
14:1 compression
Colt stage 6 cam.
Cam bearings down the block.
Filled block
Fire ringed block only
Hamilton cast head
Hamilton big valves fully ported.
Joker fab intake and valve spring setup.
Haisley pushrods.
Harland Sharpe rockers.
One piece billet valve cover.
Wet head.
Steed speed t6 comp manifold.
14mm head studs
Fully balanced rotating assembly
Fuel system:
5x.025 duall feed International injectors
.120 fuel lines.
Schied ag gov pump self containing oil
Waterman fuel pump with 3 way dump valve and regulated by check valves.
Air:
Precision 2.6x4 turbo. 1.0 housing.
Water to air IC setup
Full tube chasis rear.
Draw bar style hitch
D&J machine hubs on rear.
35 spline spool in rear
35 spline scs axle shafts.
4.63 rear gears
4.56 front gears
1410 front one piece drive shaft
1480 rear drive shaft.
Front axle has 35 spline axle shafts and grizzly locker in front.
All new bearings and seals. New ball joints and bearing assemblies
Custom heim joint front control arms that are adjustable. Custom track bar also.
Real wheels at all four corners.
Brand new trxus sts 35x12.50x16 tires
Edge cts data logger system.
5 point harness and racing seat.
Hand throttle.
Everything on the truck has 15 hooks on it. Truck is brand new. Over 100k invested. Asking 65k. Or trade for something. Turn key operation ready to go. Only reason for selling is its not what I expected.
Call or text for info and questions 8133881126 Thanks.
Located in tampa fl 33525
