2.6" S400

JohhnyFoxtrot

JohhnyFoxtrot

need a trailer
Joined
May 25, 2007
Messages
1,179
This is the turbo that I used this year. About 15 hooks on it and 1500 miles. Always cooled down to around 300* before shut off. Borg Warner S4sx series 71mm with 2.6 cover. Passed at NADM, Platte CO, and Scheids this year for tech in the 2.6 class. T-4 foot has a .90 housing on it now also have a 1.25 housing T-4 foot can have either put on it or you can get both. Extra $140 for both housings. $900 for the center section and front with either housing. Turbo made by Area Diesel.

103_2717.jpg

103_2718.jpg

103_2719.jpg

103_2720.jpg

103_2721.jpg

103_2722.jpg
 
The wheel protrudes into the opening and it has been notched from 71 to 66.

I will get a better pic of it.
 
jordanjames81 said:
Might be interested. Do you have the elbow for intercooler pipe to.
Click to expand...

Yeah a home made one didn't realy want to get rid of it but I can make another one for myself next season when another single goes back on my truck.
2001cummins said:
Will it fit a 01?
Click to expand...
Yes it should fit with not to much problems.

Loy boy said:
I'll give you $20.00 for it doug
Click to expand...
For you that might be a deal then you can beat me by 400ft. with your stock engined truck.
 
IF ya wanna sell the 1.25 housing seperate, let me know!

Is it for a 83/74 wheel?
 
Might want to sell tha housing let you know in a day.


Oh the 1.25 housing has about 50 miles and 51ft of pull on it.
 
not to derail your thread but doug you should be seeing that muffler in a day or 2 I sent you the tracking info yesterday I believe, bump for an S400
 
I used an hx 40 down pipe with a different flance on it I think 4".

Sale pending on turbo with .90 housing.

The 1.25 housing is up for sale now $140 plus shipping.
 
I will get all measurements in the morning Josh. I know it is/was 71 for inducer and 3" for exhaust. We tried a 3.4 and we couldn't get anything to fit in the truck.
 
You must log in or register to reply here.
Back
Top