Any of these can be delivered to TS.
Heavy duty chromoly traction bars. 2” O.D. round tube with 0.120” wall. Currently set at 64 in, approx. 15lbs each, 7/8 inch hole on one end and 3/4 inch hole on the other. $350 for the pair
Heavy duty traction bars, set at 64 in, approx 40-45 lbs each. Made out of 2" square tube with 1/4" wall, and a piece of angle iron welded along to bottom for extra reinforcement, 7/8 inch holes. $200 for the pair. They are the grey-ish ones on the right in the picture below.
Mounts for traction bars. Bolt to the frame or could be welded. Allows for the traction bar to mount Beside the frame instead of underneath, 7/8 inch holes. $75 for the pair
Heavy duty chromoly traction bars. 2” O.D. round tube with 0.120” wall. Currently set at 64 in, approx. 15lbs each, 7/8 inch hole on one end and 3/4 inch hole on the other. $350 for the pair
Heavy duty traction bars, set at 64 in, approx 40-45 lbs each. Made out of 2" square tube with 1/4" wall, and a piece of angle iron welded along to bottom for extra reinforcement, 7/8 inch holes. $200 for the pair. They are the grey-ish ones on the right in the picture below.
Mounts for traction bars. Bolt to the frame or could be welded. Allows for the traction bar to mount Beside the frame instead of underneath, 7/8 inch holes. $75 for the pair