cumminspwrd02
Locomotive Superhero
- Joined
- Jan 27, 2008
- Messages
- 89
Ok, I have a friend that runs an auto repair shop and they don't do much diesel work. They had a customer recently bring in an 02 dodge cummins that was havin a hard time running and now it won't run. He called me up and said no one in his shop wants to work on the diesel and they neeed some advice on fixing it. After talking to him this truck might end up being a job for me to do since him and none of his mechanics want to work on it. Any ways the truck is throwing a couple codes. It has the VP44 death code p0216 and it also showing p0234,p1689, and p1698. Obviously it needs an injection pump and propbably a lift pump if its bad too.
But the thing I have a question about it the p0234,p1689, and p1698 codes. I see the p0234 is an over boost. Does this mean a bad waste gate or bad MAP sensor? I had a p0237 on my truck and a new MAP sensor fixed it. Would it be the same for a p0234? I see one of the other codes refers to CCD and the other is a VP44 to ECM no communication code. What is the CCD code? I haven't dealt with it before. I have NOT look at the truck yet, i do plan on looking at it soon to help my friend out and it'll give me some extra cash if i do this job for him.
Thanks!
matt
But the thing I have a question about it the p0234,p1689, and p1698 codes. I see the p0234 is an over boost. Does this mean a bad waste gate or bad MAP sensor? I had a p0237 on my truck and a new MAP sensor fixed it. Would it be the same for a p0234? I see one of the other codes refers to CCD and the other is a VP44 to ECM no communication code. What is the CCD code? I haven't dealt with it before. I have NOT look at the truck yet, i do plan on looking at it soon to help my friend out and it'll give me some extra cash if i do this job for him.
Thanks!
matt