mikmaze
New member
- Joined
- Apr 15, 2009
- Messages
- 4,292
Fresh in from Harvey at Exergy. I have a set of full injectors, nozzles on bodies. Bodies are bosch remans, Nozzles are bosch motorsport 143 degree sprany angle, enlarged 60% by exergy. Nozzles have 40 miles on them, but got a 100% clean bill of healh from Harvey. 60 % over is roughly 125 hp over stock size. All pieces assembled, tested, flow balanced with zero hours engine run time since assmbly. These will fit any common rail 5.9. If you don't know what Exergy is, don't bother asking, as they are the pinnacle at what they do. This combo will perform in your truck. I will include any and all balance sheets that come from exergy with the assembled bodies. I have a fair amount of money in these so I need to get $2850 for them, plus the ride. 1 injector removed from box for picture. I do NOT need, nor want any cores for these. You can sell what you have outright, zero downtime, remove your injectors and install these and be back on the road, with a noticeable boost in power. I will be bringing these with me to Spring fling if they do not sell here first. Brand new copper washers included. Balance sheet shows within 1.01 % at 180 mpa ! First pm is first in line.
