2007 injector issues

B

Blowingblack99

New member
Joined
Jul 25, 2011
Messages
3
I have a 2007 cummins with either an injector or valve cover gasket issue. I've been getting fuel into my oil and was testing my ohms today on the injector wiring. injector one started out clicking with 18 ohms then the longer the truck sat with the key on the on position it was slowing going down then it quit and was reading .5 ohms like all the other injectors were and it stopped clicking. I'm just wondering if anyone has had a similar problem and what they did to fix it. Before I throw more money into it
 
Fuel into the oil, I think you should check your connecting tubes

Sent from phone
 
Blowingblack99 said:
The thing is it runs fine idles fine and doesn't miss at all.
Click to expand...

The 2 post above are the only 2 options. Run the engine with the valve cover removed. Might be able to see if it's an injector.

Sent from my DROID RAZR using Tapatalk 2
 
A valve cover gasket doesn't cause fuel in oil.
 
Blowingblack99 said:
The thing is it runs fine idles fine and doesn't miss at all.
Click to expand...

my 07 5.9 ran great but was flooding my engine with fuel. i had 2 body cracked injectors. changed my oil to get to the mechanic, he lives 10 miles away. when i got there i had almost twice more oil/fuel in the engine. im my case it was injectors. id start there.
just my 2 cents..
 
Last edited:
You must log in or register to reply here.
Back
Top