Hey guys, first I just want to compliment you on your great product! However this weekend I installed a 165 system on a 2012 Ram. Everything went extremely smooth until we hooked up the harness. I found the blue wire with orange tracer that was coming from the sending unit and cut and spliced into the front side of it like the directions explained for a 2011 truck but the pump would not run. Upon some further investigation we found there was no power to that wire with key on or cranking (all fuses and relays were good). So instead I tapped into a different ignition hot circuit and everything worked flawlessly. Is there a difference between the 2011 and 2012 trucks in the case of that sending unit wire?
Any info you have will be greatly appreciated!
Thanks, Wes
Any info you have will be greatly appreciated!
Thanks, Wes