24V head Big Valve Fire-ringed/ DDP 250 Injectors

Turbonetics TQ

Turbonetics TQ

Turbonetics Turbochargers
Joined
Feb 24, 2007
Messages
375
This head is for a VP-44 24v, but it is already trimmed to use with a p-pump.
All machine work was done at Mountain High Performance in Aurora, CO.

Here is a list of what is done to the head:
Resurfaced .010"
All 24 Valve guides replaced with cryo treated Cummins guides
Street performance over-sized stainless valves
High nickle exhaust seats and hardened intake seats
Fire rings cut 4.500" x 0.105" at 0.35" deep
Valves set to stock depth
Port blend in to runners
High temp valve stem seals
Haisley Machine 110 lb valve springs
Stock keepers and retainers

I am located in Casper, WY...But the Head is currently in the Golden, CO area at a friends house(I have not made it down to pick it up) and I am looking to get $2000.00 OBO for it. If it needed to be shipped I would not mind securing it to a pallet and wrapping it up. But the buyer would have to arrange a shipping company. I also make trips to Colorado every once and awhile. And if you live near some good snow a delivery/snowmobile trip could be arranged.

I also have a set of Dynomite Diesel 250 HP injectors that have ~20-25k mi on them. They are cleaned up (Brass nozzle brush only) and ready to ship.
$650.00 I will cover the shipping.

Thanks for looking -Matt 307-262-0835 No Text messaging (unless you are properly equipped with an iPhone)
 
Last edited:
I am looking for some 24v injectors in the 100-150HP range that I might consider for a trade on my injectors. Need something not too smoky and will start in -25* F weather.
 
little6cylinder said:
Bill and Pat do great work. If it came out of mountain high it's top notch.
Click to expand...

I 100% agree with you!! Bill and Pat are great guys and easy to talk to. It seems strange when ever I encounter a company that has outstanding customer service. It is a rare commodity these days.....
 
$1800.00 for the head.
I am looking for a head without fire rings and it needs to have some sort of aftermarket valve seats (not the original fall out Cummins ones)
 
photo_4_zpsf2835075.jpg


photo_3_zps0cc513d1.jpg


photo_2_zpsbda9ca45.jpg



This is a little over $2500.00 in machine work!!
I will trade for a head that has been rebuilt and can be proven to have other than stock Cummins valve seats.
 
injecotrs still for sale, I might have a set of 100 horse sticks coming into my hands to trade for..
 
Greay deal from a great guy! Matt im going to text you even though I dont have an eye fone, just cuz im a jerk :-)
 
Yes the injectors are still for sale. Any info on your injectors?

Go ahead Clifford! I dare you.
 
Im buying an ex pulling truck that the big injectors got taken out of and the 100s in it. i dont kno brand or how many holes. but i can pin check them and see when i pull them. do you kno what the ddp specs are? i really want a 7x12 or 6x13.. sac nozzles. id like to be pushing 575-600. possibly getting hx and 3b twin kit for my 66 too.. so it wont be too terrible hard to do
 
Not sure on the nozzle size. But I have had a sale pending on the injectors for a few days.
 
i have herd that most of ddp nozzles are onoly 8 hole and vco nozzles.. but im not sure that they dont differ
 
You must log in or register to reply here.
Back
Top