24vp and cr interchangability

kleann

kleann

VP44 pwr
Joined
Aug 23, 2008
Messages
4,388
Just a couple of questions I couldn't find the exact answers to by searching. Will a 24vp crank with the tone wheel provision fit in a 5.9 cr block? Will a 24vp cam work fine in a 5.9 cr?
 
12v crank and aftermarket 24v cam fit in my 2005 CR block. I'm running whatever parts I could find in the race engine. 6.7 head, 6.7 injectors, 5.9 2006 CR electronics, 24v cam, 12v crank, 2007 CR rods, 2007 CR pistons, Clevite CR bearings, etc.

Since they machine the 24v internal tone ring mounting surface into the crank without changing the rod or main spacing, it should fit. I've never tried it and could be wrong.
 
joefarmer said:
12v crank and aftermarket 24v cam fit in my 2005 CR block. I'm running whatever parts I could find in the race engine. 6.7 head, 6.7 injectors, 5.9 2006 CR electronics, 24v cam, 12v crank, 2007 CR rods, 2007 CR pistons, Clevite CR bearings, etc.

Since they machine the 24v internal tone ring mounting surface into the crank without changing the rod or main spacing, it should fit. I've never tried it and could be wrong.
Click to expand...

Thanks for the info! I guess I will have to tear an engine down and see if it will fit. I'm just not sure if the cr block girdle will interfere...
 
You must log in or register to reply here.
Back
Top