29 Spline NP241DHD New Bearings/Seals

[Nor'Easter]

I have a 241 DHD that I just split apart to swap in a new 29 spline input shaft. Replaced any bearings that I had in the shop. Input, both outputs. Same for the seals. Resealed all the mating surfaces, main case, input housing, two piece output housing. Case had 104,000 on it when I split it.

$650.

Will take a good drivers side drop NP 205 and $450.

Will take a good condition HE351 and $300.

Located in 04011 Maine.

 

[Mark Nixon]

Good Luck finding someone with a 29 spline 205 that will do that deal.
They are going in excess of $600 for good ones.
Even 23 spline ones have been going for around $250-$350, lately.

Mark.

 

[6 speed 90]

You got that right Mark, 29 spline 250s are gold if you can find them.

 

[Nor'Easter]

Good Luck finding someone with a 29 spline 205 that will do that deal.
They are going in excess of $600 for good ones.
Even 23 spline ones have been going for around $250-$350, lately.

Mark.

I don't expect to find one, thanks. I can convert it myself.

There are 4 cases within 100 miles of me at or under $200.

:blahblah1:

 

[Mark Nixon]

No reason to be snide about it, I gave you my experience and what you should expect to pay.
If you got something cheaper, then good for you.

Mark.

 

[Nor'Easter]

Bump.

I'll split shipping or you can come get it for $550.

 

[Nor'Easter]

ttt