341/HT3B compound setup

whitneyj

still in pieces
Joined
Jan 31, 2012
Messages
822
I have an HE341 to HT3B compound setup to include an ATS manifold for sale that I pulled off my P-pumped 24V. $2,000 obo

The ATS manifold is port and polished with the divider bladed. I found a few cracks when I pulled it all apart from the original compound set up (S300 with a small Holset exhaust housing machined to fit) when I changed it to the HE341. The cracks were background, the ends of the crack drilled out, preheated, welded with Ni-99 rod, and post heated. I've also ceramix coated it black.

The HE341 is also ported and polished with the waste gate opened up to just over 1 1/8". The HE341 has low miles and is tight and has also had the exahust housing ceramic coated black.

The HT3B was rebuilt and balanced and hasn't been run since. The exhaust housing has been ceramic coated black

This comes with all clamps, hot and cold pipes, and the downpipe.

I'll have pictures tonight when I get to the shop.

Reason for selling is I found a deal on a big set of turbos and don't need these laying around not being used.

(910)four seven 8-eight four 0 8
 
Only ones I have are when I was mocking up the cold pipe on the truck and on the work bench. I'll post those up and get better ones this weekend when I'm at the shop.
 
bumpity bump.

I have the turbos home now so I'll be able to get better pictures. Otherwise I could bolt them up to a spare 24V motor I have if people would like to see that instead.
 
In pieces will work! Nice truck sorry for derailing your thread. If ya ever get tired of that crew cab let me know!!
 
I have to get it back together and drive it to get sick of it ;)

Morning Bump!
 
Back
Top