3b with hx hot & cold pipe

G

gwhammy

Active member
Joined
Sep 14, 2006
Messages
2,203
I've got a used 3b with 27cm exhaust housing,new hx35 to 3b hot and cold pipe, new silicone hoses for the cold pipe, and a hx 35 12 cm exhaust housing milled diveder and milled wastegate and 38 mm wastegate flapper.

Trades considered, 800 obo plus shipping
 
I've had the cold pipe on a he351-3b I mocked up on engine stand. This is a 3.5inch pipe, I wanted to try a 3 inch and make it clear my on board air compressor. Quad made the pipes. I think this would fit a 12 valve but can't be positive.
The hot pipe won't fit a 05 but the cold pipe probably would.

Trades, I don't know. I don't need anymore injectors.
 
Bump, piping with exhaust housing and silicone couplers for cold pipe.400, am I getting close?
 
It's yours dodgentwo and dbogo is second in line if I don't here anything.

Shipping is on top of that, I forgot to put that in. If that makes a difference your off the hook just let me know.
Thanks,Gary
 
i would take all of it including the ht3b.......i also have tons of motor parts, cranks, cams, rods, blocks, pistons, heads...etc just bout everything, pm me or call me im interested in this setup....814 573 6982
 
400 is for the hot pipe, cold pipe, one 3.5 X4 inch silicone connector, one 3.5 silicone connector, and a 12 cm exhaust housing off of a hx 35 that has had the divider cut down and milled around the wastegate so a 38 mm flapper will fit and the hole enlarged. I will take 800 for the articles mentioned above along with the 3b.
I hope this clears up what I'm selling. I'm sorry if some of you misunderstood.
 
You must log in or register to reply here.
Back
Top