480 and twins piping

slor1de

slor1de

Member
Joined
Feb 17, 2007
Messages
907
480 and homemade twins piping. Charger needs freshened, has up and down play and leaks oil out compressor side under boost, no in or out play, no idea on mileage acquired in a trade awhile ago and taking up space. Have Charger, 4" hot pipe, 4" cold pipe, and intercooler pipe. Only ID marks are Compressor side has A 0636 stamped in it, exhaust side has 671 696 132 472 , hsm -a- .Make offer will post pics shortly.
 
Came off 2nd gen 12valve with a htt 66. I got them and never did anything with them. What's in the pics is what i have. Dont know what there worth, but there taking up space. Make an offer.

101_0065.jpg


101_0064.jpg


101_0063.jpg


101_0062.jpg


101_0061.jpg
 
doesn't look like a 480... 480 in a standard cover has paper thin inducer wall, and the 80mm wheel is an 8 blade, not a 7 blade
 
Any idea how to id it. The numbers i posted above are on the ex housing and compressor housing.
 
Can you remove the cover and mic the wheel? Also take pics to see if any damage to comp wheel or cover? Thanks.
 
That looks like my S475, same cover numbers and blade count. Odd that is has a twin scroll housing though.
 
I'll pop the cover and get some measurements and specs. I was hoping for around $800 but i'll listen to anything for offers
 
My calipers aren't big enuff for a good measurement, best i can come up with is approx 2.771 and 4.035


101_0071.jpg
[/IMG]
101_0070.jpg
[/IMG]

If anyone needs any other pics just ask or got any input on it
 
I'm thinking it's an S472. I'll research how well this charger works. What turbo was matched with this one? Hx35?
 
You must log in or register to reply here.
Back
Top