12vCumminsFTW
Active member
- Joined
- Dec 9, 2010
- Messages
- 1,377
Swapped in an auto so selling the other stuff.
Nv5600 is the big input version, 4x4, unknown miles, grinds 5-6, kinda cranky in other gears too, realistically needs to be rebuilt. There is a lot of sycro material in the oil. I don't know what its worth so I'll start at $1500?
Valair HD clutch hydraulics, 94-97 style, master twists to lock in firewall. About a year old, work fine. -$150
Wide 6 speed crossmember-$100
Manual pedal assembly-$75
Old style 12v 4x4 floor shifter boot-2 piece, inner boot is kinda ripped up-$20
Flywheel bolts/washers-$30
Starter spacer, bolts-$35
29 spline input shaft for np241 t-case, wide bearing version, was in a DLD, don't know if it will fit others-$75
I still have the toasted clutch, its a valair kevlar/ceramic single. i don't know it they can be rebuilt or not,or if its even worth anything, but if someone wants it let me know, I'll let it go for shipping cost plus a bit.
Also have some 47re stuff.
Stock input shaft-$25
Overdrive piston retainer-$20
Stock pan-$20
Core torque converter-$50
Auto column shifter lever and all the linkages to tranny, off a 97 truck-$15
Overdrive housing-$75. have most of the guts still, let me what you need and I'll see if I have it.
All prices are OBO+ shipping. I can ship everything except the nv5600. I'm planning on going to Scheid in August so I could bring it there if that would help somebody. I may be able to freight it, but it would be a pita and expensive. So let me know if you're interested and we might be able to work out something. Thanks
Nv5600 is the big input version, 4x4, unknown miles, grinds 5-6, kinda cranky in other gears too, realistically needs to be rebuilt. There is a lot of sycro material in the oil. I don't know what its worth so I'll start at $1500?
Valair HD clutch hydraulics, 94-97 style, master twists to lock in firewall. About a year old, work fine. -$150
Wide 6 speed crossmember-$100
Manual pedal assembly-$75
Old style 12v 4x4 floor shifter boot-2 piece, inner boot is kinda ripped up-$20
Flywheel bolts/washers-$30
Starter spacer, bolts-$35
29 spline input shaft for np241 t-case, wide bearing version, was in a DLD, don't know if it will fit others-$75
I still have the toasted clutch, its a valair kevlar/ceramic single. i don't know it they can be rebuilt or not,or if its even worth anything, but if someone wants it let me know, I'll let it go for shipping cost plus a bit.
Also have some 47re stuff.
Stock input shaft-$25
Overdrive piston retainer-$20
Stock pan-$20
Core torque converter-$50
Auto column shifter lever and all the linkages to tranny, off a 97 truck-$15
Overdrive housing-$75. have most of the guts still, let me what you need and I'll see if I have it.
All prices are OBO+ shipping. I can ship everything except the nv5600. I'm planning on going to Scheid in August so I could bring it there if that would help somebody. I may be able to freight it, but it would be a pita and expensive. So let me know if you're interested and we might be able to work out something. Thanks
