5.9 Block Filled,Girdle,Roller cam

D

dmaxexpress

New member
Joined
Feb 3, 2009
Messages
232
I Have a 5.9 block that is 4.125 bore. All machine work has been done to it, and is filled. Machined for roller cam and lifters. Also Have 5/8 girdle with it. Looking to get $2500 for it or partial trade on a 6.7 block. It is located in KY at my engine builders. My name is Kody, you can call or text me at 330-389-8649 if you need any more info.
 
(UPDATE) Im selling brand NEW diamond racing pistons 13.5 to 1 with steel rings. These were designed for this block. Selling Block Girdle pistons and stock 12v rods for $4500. If you need any more info text or call me 3303898649
 
What year is the block?

Who filled the block and is it filled to the top?

What filler was used?

What diameter are the lifter bores?

Do the pistons have deeper valve reliefs or will they need cut and are they for a 5.9 stroke crank?

Who did the machine work?
 
Its a 97 block. The roller lifter bores are .842. It was filled with hard blok. It has .250 flycut pistons. I believe sktower did the machine work. The engine is at and was designed at patrick obryants
 
the pistons are sold. im now selling the block $1500 with the girdle.

Open to offers, triple disk clutch for nv4500 prefer kennys, adj pump, cam gear. t6 manifold anything you got for a dodge 2.6 truck shoot me a pm the worst i can say is no. 330-389-8649
 
You must log in or register to reply here.
Back
Top