jlibert
New member
- Joined
- Jun 28, 2007
- Messages
- 3,454
Both smartys are brand new, never used. Bought for two vehicles we no longer own. Shoot me a reasonable offer on either one.
The smarty for the 5.9 is an S-06 with POD. I have this exact tuner on my truck, and the POD is sweet.
Here’s the link for a full description. http://www.madselectronics.com/Smarty06PoD.html
The smarty for the 6.7 is the S67. It has the ME software loaded, so it’s ready to run on vehicles with or without the DPF in place. If you have the DPF now, and plan to remove it in the future, all you have to do is change one of the options on the downloader and you’re done. Really easy.
Here’s the link for the 6.7 smarty. http://www.madselectronics.com/Smarty67.html
Armstrong performance header
The header is made by Armstrong Performance and is currently installed on my truck. I’ve had no problems with it, and it showed significant gains from 3000-3500. Perfect for a drag racer or sled puller. Fits all common rail and 24 valve engines. Comes with stainless steel mounting hardware.
Has ports for EGT and drive pressure. Is wrapped with high temp header wrap to increase spool up and decrease under hood temps. Has T3 flange and will work with any turbo that fits stock manifold (A5K, silver bullet, SPS, etc). Will consider trade for second gen manifold. $350
Check this video out for a sound clip…
http://www.youtube.com/watch?v=o_hU0S9fTUE
Flux 2.4 injector nozzles
Flux 2.4 (120 hp). These injectors clean up awesome and make great hp(good for 700+). Smoke when you want them to, otherwise they run really clean. I need good stock nozzles in return. These fit 04.5-07 5.9 cummins, have about 10k on them, and have always been fed clean 2 micron filtered fuel. Have never seen over 25k pressure. $750 shipped. Here’s a link to the manufacturer.
http://www.f1diesel.com/injectorsecho.html
Here’s a link to a video of them in action. http://www.youtube.com/watch?v=o_hU0S9fTUE
The smarty for the 5.9 is an S-06 with POD. I have this exact tuner on my truck, and the POD is sweet.
The smarty for the 6.7 is the S67. It has the ME software loaded, so it’s ready to run on vehicles with or without the DPF in place. If you have the DPF now, and plan to remove it in the future, all you have to do is change one of the options on the downloader and you’re done. Really easy.
Here’s the link for the 6.7 smarty. http://www.madselectronics.com/Smarty67.html
Armstrong performance header
The header is made by Armstrong Performance and is currently installed on my truck. I’ve had no problems with it, and it showed significant gains from 3000-3500. Perfect for a drag racer or sled puller. Fits all common rail and 24 valve engines. Comes with stainless steel mounting hardware.
Has ports for EGT and drive pressure. Is wrapped with high temp header wrap to increase spool up and decrease under hood temps. Has T3 flange and will work with any turbo that fits stock manifold (A5K, silver bullet, SPS, etc). Will consider trade for second gen manifold. $350
Check this video out for a sound clip…
http://www.youtube.com/watch?v=o_hU0S9fTUE
Flux 2.4 injector nozzles
Flux 2.4 (120 hp). These injectors clean up awesome and make great hp(good for 700+). Smoke when you want them to, otherwise they run really clean. I need good stock nozzles in return. These fit 04.5-07 5.9 cummins, have about 10k on them, and have always been fed clean 2 micron filtered fuel. Have never seen over 25k pressure. $750 shipped. Here’s a link to the manufacturer.
http://www.f1diesel.com/injectorsecho.html
Here’s a link to a video of them in action. http://www.youtube.com/watch?v=o_hU0S9fTUE
