weazel
5th gear killer
- Joined
- May 14, 2008
- Messages
- 2,252
Having a no start issue with my 6.7. Adjusted the valves today, and was using a starter bumper to turn the engine over instead of using the key to bump it over. I had the key in the run position, but did turn the key off for a bit while bumping the starter.
After putting everything back together, hopped in the cab, turned the key, and nothing. Starter is not engaging. I pulled every fuse in the box and tested with a multimeter.
The truck will start if I use the bumper to start it, but nothing from the key. Anyone have an idea of what to check next?
After putting everything back together, hopped in the cab, turned the key, and nothing. Starter is not engaging. I pulled every fuse in the box and tested with a multimeter.
The truck will start if I use the bumper to start it, but nothing from the key. Anyone have an idea of what to check next?