6.7L Garage Clean Out!!

M

maxwedgehead

Member
Joined
Nov 17, 2010
Messages
850
I have a ton of 6.7l parts that I need out of my garage that I'm never gonna use.

All prices are OBO and not including shipping.

Parts from 2010 Truck that had 66K on it

EGR Cooler and EGR valve- $100
Valver cover gasket/injector harness- $70
Valve cover- $80
Rocker riser- $30
Power steering pump assembly- $100
CP3- $600
Turbo side cold pipe and boots- $30
Engine harness- $300
Fuel filter housing assembly- $50
Exhaust Manifold- $100
Turbo- $400


2009 6.7L Truck had 280k on it but motor had 20k on rebuild, chucked a rod. Parts do not appear to have any damage, rod went on #1 cylinder and it went at the bottom of stroke, head and injector weren't touched.

Complete head, springs valves etc- $500
Complete set of rockers and bridges- $200
Complete set of injection lines- $40 per line or $200 as a set
Timing cover- $80


I have a complete set of injectors that have about 10k on them was told they were 60 horse overs, don't have proof of that, so selling as a stock set, no reason they shouldn't still be fine, #1 tip is not damaged. $1500 no cores needed

1 Crank that will need cleaned unknown miles $400

PM me what you want and I'll message pics.
 
Last edited:
I have responded to all messages and texts!

P.S will trade parts for a running 12 valve engine and 2wd 47rh! Also looking for 24 valve ECM
 
Heres most of the pics,

image-6.jpeg.html

image-5.jpeg.html

photo-4.jpg.html

image-7.jpeg.html

image-4.jpeg.html

image-3.jpeg.html

image-2.jpeg.html

image-1.jpeg.html
 
Pics were viewable, here.
Didn't see the ones I wanted, though.

Mark.
 
If you still have this stuff available when you are ready for my roller bring it all and we can work something out.
 
Just went to the other shop where the crank is an snapped a couple pics, coming your way Mark, sorry it took so long.

Sounds good, this is all the stuff I talked to you about on the phone.
 
Last edited:
Like I said folks everything is OBO, not trying to hide anything, just sick of looking at it all, if I keep anything much longer I will find a block and build an engine for something that I really don't need. Pics have been sent to everyone that has asked so far, let me know if you do not receive them.
 
After looking at the pics closer, I'll take the crank.
Get with me by e-mail, or by phone at 402-780-5127, on how we can proceed.

Mark.
 
All these views and no hits, here you go guys price drops!

Parts from 2010 Ram 3500 Truck that had 66K on it

EGR Cooler and EGR valve- $50
Valver cover gasket/injector harness- $50
Valve cover- $50
Rocker riser- $30
Power steering pump assembly- $50
CP3- $500
Engine harness- $200
Fuel filter housing assembly- $50
Exhaust Manifold- $100
Turbo- $350


2009 6.7L Dodge 2500 Truck had 280k on it but motor had 20k on rebuild, chucked a rod. Parts do not appear to have any damage, rod went on #1 cylinder and it went at the bottom of stroke, head and injector weren't touched.

Complete head, springs valves etc- $400
Complete set of rockers and bridges- $150
Complete set of injection lines- $30 per line or $150 as a set
Timing cover- $50


I have a complete set of injectors that have about 10k on them was told they were 60 horse overs, don't have proof of that, so selling as a stock set, no reason they shouldn't still be fine, #1 tip is not damaged. $1100 no cores needed
 
haven't heard anything back from Mark yet on the crank, whole list is still available. Lets try to sell the whole dang long $2,000 come get it.
 
You must log in or register to reply here.
Back
Top