HRDROKN Prestige Worldwide Joined Apr 16, 2008 Messages 621 Dec 14, 2010 #1 I'm getting ready to fab the exhaust to a SB362 and before I get too far... will a off the shelf 64/73/.9 bolt up the same?
I'm getting ready to fab the exhaust to a SB362 and before I get too far... will a off the shelf 64/73/.9 bolt up the same?
97Dodgeram diesel head Joined Nov 30, 2008 Messages 488 Dec 14, 2010 #2 prob not , i dont think off the shelf bw turbos have hx40 outlets, but i could be wrong......mine didn't anyways
prob not , i dont think off the shelf bw turbos have hx40 outlets, but i could be wrong......mine didn't anyways
roachie Taco Master Joined Nov 2, 2007 Messages 11,133 Dec 14, 2010 #3 I just checked, at least the s366 has a marmon flange.
Hurley BLAKLUNG Joined Apr 27, 2008 Messages 3,698 Dec 15, 2010 #4 iirc the .9 is a T4 divided, no? I had same as roachie
HRDROKN Prestige Worldwide Joined Apr 16, 2008 Messages 621 Dec 15, 2010 #5 Hurley said: iirc the .9 is a T4 divided, no? I had same as roachie Click to expand... Are the T3 to T4 adapters about 1/2" thick? If so that should work with my setup as I already using a 1/2" spacer to clear the PDI manifold. If different, what other than a marmon/v-band would the turbine housing be?
Hurley said: iirc the .9 is a T4 divided, no? I had same as roachie Click to expand... Are the T3 to T4 adapters about 1/2" thick? If so that should work with my setup as I already using a 1/2" spacer to clear the PDI manifold. If different, what other than a marmon/v-band would the turbine housing be?