64/Ht4B Twins #3600 SB Dual Disk, Monster Pump, Redline, injectors

WEBERBUILT

WEBERBUILT

Banned
Joined
Jul 30, 2012
Messages
254
I'm tired of VP going Commonrail so everything is going

64/71/14
Stainless diesel spring wastegate
360* thrust bearing
ported to match gasket wastegate ports opened up too
cast wheel

Ht4B
Just Rebuilt

The cold pipe, oil drain, oil feeds are from DPS

64 is brand new with 2 300' dirt drag passes and about 20 minutes of idle time
Ht4B has the same since the rebuild

This will come will EVERYTHING needed to install
including exhaust manifold and 5" downpipe

Exhaust manifold is ported on the turbo side to match the gasket

If i Don't get lowballed to bad then it will come with all new gaskets as well...

HT3B Twin Turbo 94-02 - Diesel Power Source

That is what the kit started as and i changed it to what it is now
$2500 OBO

#3600 SB Dual Disk
Roughly 20k a hand full of pulls and 2 dirt drags the clutch looked great when i had it out last time, with hydraulics
$1000OBO

Stg 2 Monster Pump
standard cam
less than 5k always fed 22-24 psi per Monster Mike
Redline is matched to the pump so it has to go with it, this setup fuels extremely hard
$2500OBO for the pair

Weston Shupe 6x13's less than 200 miles
$1000OBO

Sheid 7x24s
$700obo

Front and rear driveshafts for ex cab short box 1410 joints in the front shafts
1480 in the rear thick wall tubing $1000obo

Dana 80 1480 yoke $75
Dana 60 1410 yoke $75
241dhd 1410 yoke $75

Shafts and yokes have about 2 miles and 2 dirt passes on them

Remember prices are Best Offer Im flexible on some not others

6084821494
I can send pictures on request and i will try posting some up
 
twin set up

Hi I have a 64/71/14 on my truck now and have thought about an upgrade and my want to by your kit because I have another dodge to put my turbo on. what kind of spool up time does that set up have at the line/ driving?
 
WEBERBUILT said:
I'm tired of VP going Commonrail so everything is going

62/65/12
360* thrust
3rd gen housing
cast wheel
$1000

Bullseye s475/86/1.10
Billet wheels
2.6 bushing
BEP Race cover
rebuilt january 2012 by John G
1 pull on rebuild
T4 foot
$1500 obo

64/71/14
Stainless diesel spring wastegate
360* thrust bearing
ported to match gasket wastegate ports opened up too
cast wheel

Ht4B
Just Rebuilt

The cold pipe, oil drain, oil feeds are from DPS

64 is brand new with 2 300' dirt drag passes and about 20 minutes of idle time
Ht4B has the same since the rebuild

This will come will EVERYTHING needed to install
including exhaust manifold and 5" downpipe

Exhaust manifold is ported on the turbo side to match the gasket

If i Don't get lowballed to bad then it will come with all new gaskets as well...

HT3B Twin Turbo 94-02 - Diesel Power Source

That is what the kit started as and i changed it to what it is now
$2200 OBO you pay shipping and fees

Stg 2 Monster Pump
standard cam
less than 5k always fed 22-24 psi per Monster Mike
Redline is matched to the pump so it has to go with it, this setup fuels extremely hard
$2250OBO for the pair you pay shipping and fees


Weston Shupe 6x13's less than 200 miles
$750 OBO

Sheid 7x24s
$450 obo


Remember prices are Best Offer Im flexible on some not others
6084821494
I can send pictures on request and i will try posting some up
Click to expand...

Here's what's left price drop make some offers guys really need to move this stuff
 
I will take trades on a t3 66mm charger i also need a stock nv4500 clutch in decent shape and 2 stock running vp44 pumps
 
I've been on the fence about going to twins. How bad are these twins on the street with a VP truck?
 
Any interest in a Batmo 66/74/14(3 years old but with only 6-7k miles) and a low mileage(maybe 4k miles) SO VP towards the Monster & Redline? What sticks did you run with that combo?
 
I'm tired of VP going Commonrail so everything is going

Stg 2 Monster Pump
standard cam
less than 5k always fed 22-24 psi per Monster Mike
Redline is matched to the pump so it has to go with it, this setup fuels extremely hard
Deposit made
Pending Sale

Weston Shupe 6x13's less than 200 miles
$700OBO

Sheid 7x24s
$400obo

Banks HI Ram intake
$250

DPS T3 manifold less than 250 miles, Has four egt/Drive pressure ports can be used for twins $425

Scheid chrome .093 lines with holders
$325

Remember prices are Best Offer Im flexible on some not others

6084821494
I can send pictures on request and i will try posting some up
__________________



Some New parts added
 
You must log in or register to reply here.
Back
Top