Diablo650Hemi
New member
- Joined
- Jan 4, 2012
- Messages
- 62
This might not be a diesel but it certainly would be a good buy for someone!
650ci 5” Goodwin Hemi
38,500$
-Donovan Cast 5inch Bore Space Block (Gm Bell housing Bolt pattern)
-Hemi 99 5” Cast Heads. Ported and worked on by Goodwin Performance
-Isky Keyway Lifters
-Diamond Pistons
-60mm Roller Cam
-GRP Rods
-T&D rockers
-R&R 5 stage Dry Sump
-Morosso Pro Mod Vacuum Pump
-Quickfuel Carbs
-HRE Intake
Built by Goodwin Performance so you know it has the best of the best.
Only reason for selling is because we are purchasing a new engine.
Engine has 24 runs on it since full rebuild. (Rods, Pistons, Lifters, Cam, Rings, Bearing etc)
This engine made 1456hp @ 8000rpm on Goodwins DTS Dyno.
You are buying this engine turn key, from Carbs to Oil System.
This is a serious 5” bore space Mopar engine and a lot of engine for the price tag.
This beautiful engine is priced to sell.
[ame="http://www.youtube.com/watch?v=RZtuqdclKUs"]http://www.youtube.com/watch?v=RZtuqdclKUs[/ame]
Doug
819-570-0343
650ci 5” Goodwin Hemi
38,500$
-Donovan Cast 5inch Bore Space Block (Gm Bell housing Bolt pattern)
-Hemi 99 5” Cast Heads. Ported and worked on by Goodwin Performance
-Isky Keyway Lifters
-Diamond Pistons
-60mm Roller Cam
-GRP Rods
-T&D rockers
-R&R 5 stage Dry Sump
-Morosso Pro Mod Vacuum Pump
-Quickfuel Carbs
-HRE Intake
Built by Goodwin Performance so you know it has the best of the best.
Only reason for selling is because we are purchasing a new engine.
Engine has 24 runs on it since full rebuild. (Rods, Pistons, Lifters, Cam, Rings, Bearing etc)
This engine made 1456hp @ 8000rpm on Goodwins DTS Dyno.
You are buying this engine turn key, from Carbs to Oil System.
This is a serious 5” bore space Mopar engine and a lot of engine for the price tag.
This beautiful engine is priced to sell.
[ame="http://www.youtube.com/watch?v=RZtuqdclKUs"]http://www.youtube.com/watch?v=RZtuqdclKUs[/ame]
Doug
819-570-0343