7x.016 24v. anybody running them?

[jessmeistertc]

Ben has a set of these and I want to know if they would be way too much for my setup and a SO pump. I havent found much info on this particular size injector. I clean these .015 lift and stroked 7x.012s up with ease right now, and after talking with Kyle the other day, I am leaning towards some 6x.016s. how would the 7x16s compare to the 6x16s? way bigger or no? I was trying to figure out how to calc. the area of injectors but the formulas that i used werent right. Truck sees little bit of the street, but by no means a Daily Driver. Let me know what you think. Thanks,

Jesse

 

[cummins724]

Most people stopped making anything bigger than a 7x.012 because injector tips are known to crack. I'd go with the 6 hole nozzles.

 

[shiftycapone]

Most people stopped making anything bigger than a 7x.012 because injector tips are known to crack. I'd go with the 6 hole nozzles.

I would think it has more to do with the process used to get the holes that large (edm or extrude hone) and the type of nozzle being used (sac or vco).