All parts located near Schaumburg, IL, 1/2 hour west of Chicago, near major highways, please call 630-254-2965 if interested.
Cummins out of a 92 W250 complete w/ injector pump and turbo, 300K. No bellhousing/flywheel/flywheel housing, but it has all valve covers, oilpan, accessories etc. Ran well when pulled. $1100
Fisher 8' plow setup for 72-93 Dodge, it is an old style conventional setup, not minute mount, has underhood electric hydraulic pump, joystick, truck frame, cables, controller, lights, blade, etc good shape $675
29 spline NP205, with shifter. Worked well when removed $600
Skyjacker DR60 rear leaf springs, what comes in some skyjacker lift kits good shape $340
Getrag top, looks to be in good shape $200
Getrag tailhousing and trans mount from 2wd $150
Getrag 2wd mainshaft $125
Getrag bellhousing, $80
Getrag case, the input shaft bearing race spun and wore the case a little, maybe of some use to a machinist? $30
Clutch/brake pedals and clutch master cyl bracket from 92 W250, $115
3.07 SRW front Dana 60 (61)axle from 89 Dodge, complete w/ hubs, spring plates and brakes. Good shape $550
3.54 gears from front dana 60, Dana/spicer gears, $170
Stock dana 60 front carrier with Powertrax lock right locker installed, originally came w/ 3.54's, $325
Manual trans(no column shifter) steering column, non tilt, I think I have the steering wheel also, $60
Steering box/bracket from 92 W250, $60
Rear jumpseat bottoms and frames from a 90 and earlier clubcab, the only difference I think is the red is darker on these than on the later trucks, good shape $15
Red bench seat from 92, one or two small holes but otherwise good shape $65 Dodge replacement rocker for drivers side standard cab truck, new, still has Dodge stickers on it $60
Sliding rear window, $60
Fixed rear window(non sliding), $30 I have gaskets for this and the above sliding window, don't know how good they are though.
Passenger door, no power options, some rust, all glass included, $75
Drivers door glass, $30 for the big piece, $20 for the vent window
Steel weathergard toolbox painted white $80
Factory Dodge tach with directions and wiring $300
Factory 92 guage cluster from manual truck, everything worked when removed $60
Guage cluster minus speedo $20
Guage cluster faceplates, one woodgrain, one base model $15 ea
Radiator from 92 manual truck $75
Intercooled radiator brackets $20
Stock airboxes, I have 92 and earlier style and 93, $15 ea
Stock 4" turbo air inlet rubber tubes $15 ea
please call 630-254-2965, thanks
Cummins out of a 92 W250 complete w/ injector pump and turbo, 300K. No bellhousing/flywheel/flywheel housing, but it has all valve covers, oilpan, accessories etc. Ran well when pulled. $1100
Fisher 8' plow setup for 72-93 Dodge, it is an old style conventional setup, not minute mount, has underhood electric hydraulic pump, joystick, truck frame, cables, controller, lights, blade, etc good shape $675
29 spline NP205, with shifter. Worked well when removed $600
Skyjacker DR60 rear leaf springs, what comes in some skyjacker lift kits good shape $340
Getrag top, looks to be in good shape $200
Getrag tailhousing and trans mount from 2wd $150
Getrag 2wd mainshaft $125
Getrag bellhousing, $80
Getrag case, the input shaft bearing race spun and wore the case a little, maybe of some use to a machinist? $30
Clutch/brake pedals and clutch master cyl bracket from 92 W250, $115
3.07 SRW front Dana 60 (61)axle from 89 Dodge, complete w/ hubs, spring plates and brakes. Good shape $550
3.54 gears from front dana 60, Dana/spicer gears, $170
Stock dana 60 front carrier with Powertrax lock right locker installed, originally came w/ 3.54's, $325
Manual trans(no column shifter) steering column, non tilt, I think I have the steering wheel also, $60
Steering box/bracket from 92 W250, $60
Rear jumpseat bottoms and frames from a 90 and earlier clubcab, the only difference I think is the red is darker on these than on the later trucks, good shape $15
Red bench seat from 92, one or two small holes but otherwise good shape $65 Dodge replacement rocker for drivers side standard cab truck, new, still has Dodge stickers on it $60
Sliding rear window, $60
Fixed rear window(non sliding), $30 I have gaskets for this and the above sliding window, don't know how good they are though.
Passenger door, no power options, some rust, all glass included, $75
Drivers door glass, $30 for the big piece, $20 for the vent window
Steel weathergard toolbox painted white $80
Factory Dodge tach with directions and wiring $300
Factory 92 guage cluster from manual truck, everything worked when removed $60
Guage cluster minus speedo $20
Guage cluster faceplates, one woodgrain, one base model $15 ea
Radiator from 92 manual truck $75
Intercooled radiator brackets $20
Stock airboxes, I have 92 and earlier style and 93, $15 ea
Stock 4" turbo air inlet rubber tubes $15 ea
please call 630-254-2965, thanks
