94 RCLB Modified - parting out

T

TheBullRoars

New member
Joined
Jun 21, 2013
Messages
164
Located in Madison, WI
4WD Reg cab, long box.

Diesel Pros camshaft
S468 turbo (.91 housing) to 5" stack
160 Injection pump balanced at DPE
4k rpm governor springs
5x18 Injectors
upgraded delivery valves
2095 rack plug
Tork Tek overflow valve
Airdog 150 lift pump
Titanium valve spring retainers and 10* locks
60 lb over valve springs

Borgeson Heavy Duty steering box (quick ratio and reduced turn radius)
Borgeson Heavy Duty steering shaft
New power steering pump and hoses
Rebuilt vacuum pump

New head gasket and Mighty Diesel head bolts(caused valve cover gaskets to leak)
All new upper end gaskets, seals
New radiator, water pump, thermostat, hoses, serp belt, front seal, timing cover gasket etc
Billet tappet cover with breathers

SRT style hood
2000+ sport front bumper
rear roll pan

interior very clean w new carpet but needs detailing/panels painted

Billet Input shaft
Deep trans pan
(According to previous owner, but it is holding the power, shifts firm, and has never slipped

It needs a new box as the current one is badly dented.

NO RUST besides on the box.

Text 608 577 4932
 
Waste of time to come up with an arbitrary price for every single part, which would only be used as a basis for negotiation. If somebodys honestly interested in something they will contact me and try to haggle the best deal they can, like usual
 
TheBullRoars said:
Waste of time to come up with an arbitrary price for every single part, which would only be used as a basis for negotiation. If somebodys honestly interested in something they will contact me and try to haggle the best deal they can, like usual
Click to expand...

Incorrect. Put a price on each part, or your thread gets deleted. Follow the forum rules, it's not that hard.
 
400 Diesel Pros camshaft
900 S468 turbo (.91 housing) to 5" stack
800 160 Injection pump balanced at DPE
50 4k rpm governor springs
500 5x18 Injectors
300 upgraded delivery valves
5 2095 rack plug
50 Tork Tek overflow valve
400 Airdog 150 lift pump
400 Titanium valve spring retainers and 10* locks
60 60 lb over valve springs

400 Borgeson Heavy Duty steering box (quick ratio and reduced turn radius)
150 Borgeson Heavy Duty steering shaft
50 New power steering pump and hoses
50 Rebuilt vacuum pump


200 Billet tappet cover with breathers

300 SRT style hood
200 2000+ sport front bumper
100 rear roll pan

100 interior very clean w new carpet but needs detailing/panels painted
 
Last edited:
If you would like to have a problem logging into this forum in the future, please let me know.
 
Macktruckdriver said:
http://i.kinja-img.com/gawker-media/image/upload/s--fS95eINR--/18j49tap7ym2ojpg.jpg

I can't ever make that work
Click to expand...
712948017414397812e27f48cc2b0a98.jpg
 
You must log in or register to reply here.
Back
Top