98 2500 12 valve parts

97DieselVT

New member
Joined
Aug 30, 2013
Messages
92
have a complete 1998 regular cab dodge 2500 parts truck minus motor, tranny, t-case and driveshafts.
used to be a 5 speed 4x4 truck.

cluster (shows approximately 143k?)- $75 shipped

dash (not cracked but no airbag as it was deployed) - $125 picked up only

PCM - $175 shipped

Dana 80 limited slip SRW rear and dana 60 4x4 front, 3.55 gear ratio, complete assemblies with roller tires to move them around. Very minimal surface rust, undercoated every year. Dana 60 front needs sway bar mount on drivers side re-welded. Asking $800 for pair, will not part out. Pickup only, will not ship unless buyer arranges shipping.

Good doors with mirrors, dark green color - $150 a piece

5 inch y-pipe and 5 inch stacks. 4 inch inlet. Will include used 4 inch 90 degree elbow. Asking $200 for all. Pickup only, will not ship.

Leather seats, Drivers side is power and has small rip in edge of seat and along middle seam. Passenger side is manual. Has middle seat with fold down console. Color is tan.
Asking $350 for all. Local pickup only.

Pair of front stock lower control arms.
Fair shape, no rot. $70 shipped on both.

Front Dana 60 stock suspension coils. No cracks or rot.
Includes stock rubber top caps. Asking $100 plus shipping for both.

Stock used under bed plastic fuel tank. 40 gallon I believe? Includes sending unit and stock fuel lines. Asking $150. Local pickup only.

Set of 4 265/75/16 Mastercraft Courser C/T tires with stock dodge 8 lug rims and factory hubcaps. around 65% tread left. Asking $400 for all. Local pickup only.

Rear Overload Camper Springs with rear sway bar. Asking $220. Local Pickup only.

Stock fuel Filler Neck and locking fuel cap with key
Asking $60 shipped.

Stock steering box.
Asking $50 plus shipping.

Stock steering shaft. Asking $25 plus shipping.

Can text and email pictures of any items.
Thanks for looking.
 
PCM, Gauge cluster and Engine wiring harness are sold.
Still have a lot of other good parts
Harnesses, axles, doors, etc..
Make offers
Need stuff gone.
Thanks.
 
Splitting up the axles as the front needs a drivers side sway bar mount welded back on.
Therefore I am asking $200 for the front Dana 60 as is and $500 for the rear Dana 80.
Both have 3.55 gears and rear has factory limited slip.
Both will come with a set of rollers to make it easier to move them.
 
Back
Top